Sony VPL-AW10 Operating Instructions - Page 46
Setup Menu
UPC - 027242714946
View all Sony VPL-AW10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Setup Menu The Setup menu is used to change the factory preset settings, etc. Status Language Cooling Setting Standby Mode Power Saving Sets whether or not the on-screen display is displayed. Set to "Off" to turn off the on-screen displays except for the menus, message when turning off the power, and warning messages. Selects the language used in the menu and on-screen displays. Available languages are: English, Dutch, French, Italian, German, Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese, Chinese (Simplified Chinese), Chinese (Traditional Chinese), Korean, Thai and Arabic. Use this item when using the projector at high altitudes. High: Use this setting when using the projector at an altitude of 1,500 m or higher. Standard: Use this setting when using the projector at normal altitudes. Note When this item is set to "High", the fan noise becomes slightly louder since the number of fan rotation increases. Lowers the power consumption in standby. When set to "Standard" the power consumption in standby becomes normal. When set to "Low", the power consumption in standby mode is lowered. Sets the power saving mode. When set to "On", the projector goes into power saving mode if no signal is input for 10 minutes. At that time, after the ?/1 (On/ standby) indicator flashes, it will light in orange and the screen becomes dark. In power saving mode, the power saving mode is cancelled if a signal is input or any button is pressed. If you do not want to set the projector to power saving mode, select "Off". 46