Sony VPL-CX1 Operating Instructions - Page 17

To connect an IBM PC/AT compatible computer When you use a USB mouse and USB equipment Rear side AUDIO MOUSE VIDEO S VIDEO INPUT A to USB equipment HD D-sub 15-pin cable (supplied) Computer to monitor output USB cable A type - B type (supplied) Stereo audio connecting cable (not supplied) to USB connector to audio output Setting Up and Projecting On the USB function When connecting the projector to a computer by using the USB cable for the first time, the computer recognizes the following devices automatically. 1 USB hub (general use) 2 USB human interface device (wireless mouse function) 3 USB human interface device (projector control function) The computer also recognizes the device connected to the downstream connector on the projector. Recommended operating environment When you use the USB function, connect your computer as illustrated above. This application software and the USB function can be used on a computer loaded with Windows 98, Windows 98 SE or Windows 2000 preinstall models. Notes • As the projector recognizes the USB mouse when the computer is connected to the USB connector, do not connect anything to the PS/2 mouse port. • Your computer may not start correctly when connected to the projector via the USB cable. In this case, disconnect the USB cable, restart the computer, then connect the computer to the projector using the USB cable. • This projector is not guaranteed for suspend, standby mode. When you use the projector in suspend, standby mode, disconnect the projector from the USB port on the computer. • Operations are not guaranteed for all the recommended computer environments. Connecting the Projector 17 GB