Sony VPL CX125 Operating Instructions - Page 41
Setting items, Functions, Initial setting, Adjustments and Settings Using a Menu
UPC - 027242728189
View all Sony VPL CX125 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Setting items Functions Initial setting ID Mode (VPL-CX125/ CX155 only) Assigns an ID number (1 to 3) to the projector when you All want control two or more projectors individually with the supplied Remote Commander. When this item is set to "1," you can control the projector with the Remote Commander with the ID MODE key set to "1." When it is set to "All," you can control all the projectors with the Remote Commander independently of the ID MODE keys of the Remote Commander. Direct Power On Set to "On" if you are using a circuit breaker to turn the Off power on/off the entire system. You can turn off the power just by unplugging the power cord without pressing the ?/1 key. High Altitude Set to "On" when the projector is used at an altitude of Off Mode 1,500 m or higher. Notes • The auto V Keystone adjustment may not correct the trapezoidal distortion perfectly, depending on the room temperature or the screen angle. • If High Altitude Mode is set to "On" at an altitude under 1,500 m, the reliability of the lamp may be diminished. Adjustments and Settings Using a Menu The Installation Menu 41