Sony VPL-EW130 Quick Reference Manual - Page 36
Disposal of the used lamp, For the customers in the USA
View all Sony VPL-EW130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
4 Insert the new lamp all the way in until it is securely in place. Tighten the 2 screws. Caution Disposal of the used lamp For the customers in the USA Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Telecommunications Industry Association (www.eiae.org). 5 Close the lamp cover and tighten the 1 screw. Note Be sure to install the lamp and Lamp cover securely as it was. If not, the projector cannot be turned on. 6 Connect the AC power cord to a wall outlet and turn on the projector. 7 Reset the lamp timer for notification of the next replacement time. Select "Lamp Timer Reset" on the SET SETTING menu then press the ENTER key. When a message appears, select "Yes" to reset the lamp timer. GB 16 Replacing the Lamp