Sony VPL-EX435 Operating Instructions - Page 31
The Connection/Power Menu
View all Sony VPL-EX435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Adjustments and Settings Using a Menu The Connection/Power Menu The Connection/Power menu is used for setting for the connections and power. Items Item descriptions LAN Settings IP Address Setup*1 Auto (DHCP): The IP address is assigned automatically from the DHCP server such as a router. Manual: To specify the IP Address manually. WLAN Settings WLAN Connection*2 WLAN Network*3 On/Off: Set the wireless output of the USB wireless LAN module (not supplied) to On/Off. Access Pt./Client *4: Changes modes for WLAN. *5 HDBaseT setting Sets the function of the HDBaseT/LAN terminal. (VPL-EW578 only) HDBaseT/LAN terminal HDBaseT: Connecting the HDBaseT transmitter and the LAN cable enables transmitting the signal of the Video, Audio, Ethernet, and RS-232C. LAN: Connecting the LAN cable for Ethernet directly enables connecting to the network. (Use when connecting the cable directly without the HDBaseT transmitter.) RS-232C setting Via HDBaseT: You can connect this unit to the RS-232C terminal via the HDBaseT transmitter. (Baud rate: 9600bps) RS-232C terminal: Use when connecting to the RS-232C terminal of this unit directly. Network Presentation Connection CODE On/Off: This is the presentation function via the network. It controls the connection using the displayed number (CODE) on the right bottom of the screen. During the image transmission, using the ENTER key on the remote commander makes Connection CODE display again. Display Setting LAN Mode Displays the LAN settings of the projector or the settings of the USB wireless LAN module that operates as a client at the bottom right of the screen. Wired: Displays the IP address of LAN preferentially. Wireless: Displays the IP address of the USB wireless LAN module preferentially. Dynamic Range*6 AP Mode Displays the SSID of the USB wireless LAN module that operates as an access point at the bottom right of the screen. Sets the image input level of the INPUT C/D/E terminal.*7 Auto: Distinguishes the image input level automatically. Limited: Set when the image input level is 16-235. Full: Set when the image input level is 0-255. The Connection/Power Menu 31