Sony VPL-EX435 Quick Reference Manual - Page 48
Warning indicators and remedies, Indicator status, The number of, flashes, Meaning, Remedies
View all Sony VPL-EX435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Warning indicators and remedies Indicator status The number of flashes Twice Three times (Lights (Flashes in red) in red) Twice (Flashes (Flashes in red) in red) Both indicators flash Meaning Remedies The lamp cover is not Check how the lamp cover is attached securely. attached and install securely. The lamp does not light properly. The temperature of the lamp is unusually high. Turn off the projector and turn it on again after the lamp has cooled. If the same symptom occurs, turn off the projector again and remove the lamp (page 23), then check if the lamp is not broken. If the lamp is not broken, reattach the lamp and turn on the projector again. If the symptom occurs again, the lamp may be exhausted. In this case, replace the lamp with a new one (page 23). If the lamp is broken, do not exchange the lamp by yourself. Consult a qualified Sony consultant. The temperature in the projector is abnormal. • Check if the air filter is clogged, then clean or replace it (page 25). • Check if the ventilation holes (intake/exhaust) are not blocked by the wall or an object and secure a sufficient gap. • Check the ambient temperature and use the projector within the range of operating temperature. If the indicators flash in a manner other than described above, unplug the AC power cord and make sure the ON/STANDBY indicator turns off, then plug the AC power cord into the wall outlet and turn on the projector. If the problem still persists, consult with qualified Sony personnel. GB 22 Indicators If there is any problem or an error message appears on the screen, refer to "Messages List" or "Troubleshooting" in the Operating Instructions contained in the supplied CDROM.