Sony VPL-EX575 Operating Instructions - Page 9
Preparation, Connecting the Projector, Connecting a Computer
View all Sony VPL-EX575 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
B Preparation Connecting the Projector Notes • Make sure all the equipment is powered off when connecting the projector. • Use the proper cables for each connection. • Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself. • For more information, refer also to the instruction manuals of the equipment you are connecting. • Use a no-resistance audio cable. Connecting a Computer Connection with a computer is explained for each input signal. INPUT A/INPUT B For connecting a computer with an RGB output terminal. Mini D-sub 15-pin cable (supplied) Preparation Computer RGB output terminal Audio output terminal Audio cable (Stereo mini plug) (not supplied) Notes • The audio input terminal is available only on VPL-EW578/EW575/EW455/EW435/EX575/ EX455/EX435. • In screen setting of your computer, it is recommended that you set the resolution of an external monitor as below; - VPL-EW578/EW575/EW455/EW435: 1280 × 800 pixels - VPL-EX575/EX570/EX455/EX450/EX435/EX430: 1024 × 768 pixels INPUT C/INPUT D For connecting a computer with an HDMI output terminal. HDMI cable (not supplied) Computer HDMI output terminal Connecting the Projector 9