Sony VPL-FHZ90L Operating Instructions - Page 41

Start ADCP Service, Requires Authentication, Port No., Timeout, Host Address, Start PJ Talk Service

Get Sony VPL-FHZ90L PDF manuals and user guides View all Sony VPL-FHZ90L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

3 Click on [ADCP] to display the ADCP page. ADCP button Start ADCP Service: Set ADCP to enabled or disabled. Items for ADCP are enabled only when this function is enabled. The function is enabled at the factory default. -Requires Authentication: Set the authentication for ADCP to enabled or disabled. The password is the same as that of the Web page administrator. -Port No.: Input the server port of ADCP. The factory default setting is "53595." -Timeout: Input the time (seconds) until ADCP communication is terminated in case it is disconnected. The factory default setting is "60." -Host Address: Input the IP address that the ADCP server is allowed to receive. If no IP address is input, receiving commands will be allowed from any IP address. From the moment the IP address is input, access will be allowed only from that input IP address. For security reasons, it is recommended to input an IP address to restrict access. 4 Click on [PJ Talk] to display the PJ Talk page. PJ Talk button Start PJ Talk Service: Set PJ Talk to enabled or disabled. Items for PJ Talk are enabled only when this function is enabled. The function is disabled at the factory default. -Community: Input the community name of Advertisement and PJ Talk. If the community name for PJ Talk is changed, the one for Advertisement will also be changed. Only four alphanumeric characters can be input. The factory default setting is "SONY." To avoid unwanted access to the projector from other computers, changing the community name of the factory default is recommended. -Port No.: Input the server port of PJ Talk. The factory default setting is "53484." -Timeout: Input the time (seconds) until PJ Talk communication is terminated in case it is disconnected. The factory default setting is "30." -Host Address: Input the IP address that the PJ Talk server is allowed to receive. If no IP address is input, receiving commands will be allowed from any IP address. From the moment the IP address is input, access will be allowed only from that input IP address. For security reasons, it is recommended to input an IP address to restrict access. 5 Click on [PJ Link] to display the PJ Link page. PJ Link button Start PJ Link Service: Set PJ Link to enabled or disabled. Items for PJ Link are enabled only when this function is enabled. This function is enabled at the factory setting. -Requires Authentication: Set the authentication for PJ Link to enabled or disabled. -Password: Input the authentication password for PJ Link. For the factory default password, refer to the PJ Link specifications. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
41
3
Click on [ADCP] to display the ADCP page.
Start ADCP Service:
Set ADCP to enabled or
disabled. Items for ADCP are enabled only
when this function is enabled. The function
is enabled at the factory default.
-Requires Authentication:
Set the
authentication for ADCP to enabled or
disabled. The password is the same as that
of the Web page administrator.
-Port No.:
Input the server port of ADCP. The
factory default setting is “53595.”
-Timeout:
Input the time (seconds) until ADCP
communication is terminated in case it is
disconnected. The factory default setting is
“60.”
-Host Address:
Input the IP address that the
ADCP server is allowed to receive. If no IP
address is input, receiving commands will
be allowed from any IP address. From the
moment the IP address is input, access will
be allowed only from that input IP address.
For security reasons, it is recommended to
input an IP address to restrict access.
4
Click on [PJ Talk] to display the PJ Talk page.
Start PJ Talk Service:
Set PJ Talk to enabled or
disabled. Items for PJ Talk are enabled only
when this function is enabled. The function
is disabled at the factory default.
-Community:
Input the community name of
Advertisement and PJ Talk. If the
community name for PJ Talk is changed,
the one for Advertisement will also be
changed. Only four alphanumeric
characters can be input. The factory default
setting is “SONY.” To avoid unwanted
access to the projector from other
computers, changing the community name
of the factory default is recommended.
-Port No.:
Input the server port of PJ Talk. The
factory default setting is “53484.”
-Timeout:
Input the time (seconds) until PJ
Talk communication is terminated in case it
is disconnected. The factory default setting
is “30.”
-Host Address:
Input the IP address that the
PJ Talk server is allowed to receive. If no IP
address is input, receiving commands will
be allowed from any IP address. From the
moment the IP address is input, access will
be allowed only from that input IP address.
For security reasons, it is recommended to
input an IP address to restrict access.
5
Click on [PJ Link] to display the PJ Link page.
Start PJ Link Service:
Set PJ Link to enabled or
disabled. Items for PJ Link are enabled only
when this function is enabled. This function
is enabled at the factory setting.
-Requires Authentication:
Set the
authentication for PJ Link to enabled or
disabled.
-Password:
Input the authentication
password for PJ Link. For the factory default
password, refer to the PJ Link
specifications.
ADCP button
PJ Talk button
PJ Link button