Sony VPL-HS51A Operating Instructions - Page 52
Specifications - lcd
UPC - 027242682504
View all Sony VPL-HS51A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Specifications System Projection system 3 LCD panels, 1 lens, projection system LCD panel 0.73-inch TFT LCD panel with micro-lens array, 2,764,800 pixels (921,600 pixels × 3) Lens 1.6 times zoom lens (manual) f21.3 - 34.1 mm/F2.4 - 3.16 Lamp 135 W UHP type Projection picture size 40 to 200 inches (measured diagonally) Color system NTSC3.58/PAL/SECAM/NTSC4.43/ PAL-M/PAL-N/PAL60 system, switched automatically/ manually (PAL60 system not switched manually) Acceptable video signals 15 kHz RGB/component 50/60 Hz, Progressive component 50/ 60 Hz, DTV (480/60i, 575/50i, 480/60p, 575/50p, 720/60p, 720/50p, 1080/60i, 1080/50i), 1080/24PsF, Composite video, Y/C video Acceptable computer signals fH: 19 to 72 kHz fV: 48 to 92 Hz Maximum resolution WXGA 1280 × 768, fV: 60 Hz Input Video input VIDEO: phono type Composite video: 1 Vp-p±2 dB sync negative (75 ohms terminated) S VIDEO: Y/C mini DIN 4-pin type Y (luminance): 1 Vp-p±2 dB sync negative (75 ohms terminated) C (chrominance): burst 0.286 Vp-p ±2 dB (NTSC) (75 ohms terminated) burst 0.3 Vp-p±2 dB (PAL) (75 ohms terminated) Y/PB/CB/PR/CR Component: phono type G with Sync/Y: 1 Vp-p±2dB sync negative (75 ohms terminated) B/CB/PB: 0.7 Vp-p±2dB positive (75 ohms terminated) R/CR/PR: 0.7 Vp-p±2 dB positive (75 ohms terminated) HDMI Digital RGB/Y/CB(PB)CR(PR) INPUT A HD D-sub 15-pins Analog RGB/component: R/CR (PR): 0.7 Vp-p±2 dB (75 ohms terminated) G: 0.7 Vp-p±2 dB (75 ohms terminated) G with sync/Y: 1 Vp-p±2 dB sync negative (75 ohms terminated) B/CB (PB): 0.7 Vp-p±2 dB (75 ohms terminated) SYNC/HD: Composite sync input: TTL level, positive/ negative Horizontal sync input: TTL level, positive/negative VD: Vertical sync input: TTL level, positive/ negative Ethernet (VPL-HS51 only) RJ-45 10BASE-T/100BASE-TX TRIGGER Minijack Power on: DC 12 V, output impedance: 4.7 kilohms Power off: 0 V General Dimensions 348 × 135 × 360 mm (13 5/8 × 5 7/8 × 14 5/8 inches) (w/ h/d) Mass VPL-HS50: Approx. 5.6 kg (12 lb 6 oz) VPL-HS51: Approx. 5.7 kg (12 lb 6 oz) Power requirements AC 100 to 240 V, 0.8-1.95 A, 50/60 Hz Power consumption VPL-HS50: Max. 195 W Standby mode: 3 W ECO mode: 0.5 W VPL-HS51: Max. 195 W Standby mode: 4.5 W ECO mode: 0.5 W Operating temperature 0°C to 35°C (32°F to 95°F) 52 Specifications