Sony VPL-HW65 Startup Guide - Page 22
Select Yes., Caution
View all Sony VPL-HW65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
7 Remove the filter holder. 11Wipe dust off the ventilation holes (intake) with a soft cloth. 8 Remove the air filter. Claws Ventilation holes (intake) 12Place the unit back on its original position. 13Turn on the unit, then select the lamp setting item on the Setup menu. The menu screen below will be appeared. 9 Attach the new air filter so that it fits into each claws (10 positions) on the filter holder. Note Attach the air filter aligning it with the shape of the filter holder. Also, do not touch the fan after removing the air filter that is set deep inside the projector. 10 Attach the filter holder. Note The projector will not turn on unless the filter holder is securely closed. Tip If "Settings Lock" is set to "Level B," set to "Off" once. 14Select "Yes." Caution Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid electrical shock or fire. Notes • The unit will not turn on unless the lamp is securely installed in place. GB 22