Sony VPL-VW260ES Operating Instructions - Page 42
On-screen display, Remote control, 3D video images, Symptom, Cause and Remedy
View all Sony VPL-VW260ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Symptom Cause and Remedy Page Image is left on the When high contrast non-moving images are displayed for a - screen. (image retention) long period of time, there may be some image retention on the screen. This is only a temporary condition. Turning off the power for a while will eliminate the retained image. On-screen display Symptom Cause and Remedy Page On-screen display does Set "Status" on the Setup menu to "On." 29 not appear. Check if the ON/STANDBY indicator should light in green. 7 When the ON/STANDBY indicator blinks in green, the unit is starting up. Wait until it stops blinking and remains lit in green. The model name does not The display mode of the unit may be set at the time of - disappear from the purchase. Consult with your local dealer or qualified Sony screen. personnel. Remote control Symptom The remote control does not work. Cause and Remedy Batteries could be weak. Replace them with new batteries. Insert the batteries with the correct polarities. If there is a fluorescent lamp near the remote control detector, the unit may work improperly or inadvertently. Confirm the position of the remote control detector on the unit. Set "IR Receiver" to "Front & Rear" on the Installation menu. Page - - - 3, 4 34 3D video images Symptom Cause and Remedy The video image does not Check if the 3D glasses are turned on. seem like 3D video images. Make sure that the battery in the 3D glasses could be weak or is sufficiently charged. Set "2D-3D Display Sel." to "Auto" or "3D." Check if the input signals are compatible 3D signals. The 3D signals may not be input depending on the specifications of the connected AV selector/AV amplifier/ external equipment. If the 3D signal is not input, confirm the specifications and/or settings of the AV selector/AV amplifier/external equipment. When the viewing position is too far from the unit, the 3D glasses may not be able to display the images properly. The screen size is not appropriate. Set the zooming magnification to low or watch the image from farther away from the screen. For details, see "Precautions for use" of "Using the 3D Glasses." Page 14 - 31 55 - 14 60 14 42