Sony VPL-VW300ES Operating Instructions - Page 29
Setup Menu
View all Sony VPL-VW300ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Setup Menu The Setup menu is used to change the factory preset settings, etc. Using the Menus Setting items Status Language Menu Position Cooling Setting Remote Start Description Sets whether or not the on-screen display is displayed. Set to "Off" to turn off the on-screen displays except for certain menus, message when turning off the power, and warning messages. Selects the language used in the menu and on-screen displays. You can change the position to display the menu on the screen. Bottom Left: Displays the menu on the bottom left area of the screen. Center: Displays the menu on the center of the screen. Sets the unit to operate at the prevailing atmospheric pressure. High: Use this setting when using the unit at an altitude of 1,500 m (approx. 4,900 ft) or higher. Standard: Use this setting when using the unit at normal altitudes. Tip When this item is set to "High," the fan noise becomes slightly louder since the fan speed increases. Sets the Remote Start settings. On: You can turn on the power from a PC or a terminal which is connected to a network. Off: Turns off the Remote Start function. Tips • To use the function, the unit should be connected to the network in advance (page 36). • To turn on the power with the Remote Start function, a special command should be sent from a PC or a terminal. For details, consult with qualified Sony personnel. Note When Remote Start is set to "On," the standby power requirement will increase. When Network Management is set to "On," the Remote Start setting is set to "Off" automatically, and you cannot change the setting. Setup Menu 29