Sony VPL-VW360ES Startup Guide - Page 13
Installing the Unit, Step 2
View all Sony VPL-VW360ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Step 2 Installing the Unit 1 Position the unit so that the lens is parallel to the screen. 2 After connecting the AC power cord to the unit, plug the AC power cord into a wall outlet. Rear of the unit 3 Press the ?/1 (ON/STANDBY) button to turn on the unit. Front of the unit Front of the unit Flashes in green for tens of seconds and then lights in green. 4 Project an image on the screen, then adjust the focus, size, and position. VPL-VW550ES/VW360ES Lights in red. Note After connecting the AC power cord to the unit, the ON/STANDBY indicator may blink in orange. You may not be able to control the unit while the indicator is blinking, but this is not a malfunction. Wait until it stops blinking and remains lit in red. a Adjust the focus. Press the LENS ADJUSTMENT (FOCUS) button to display the Lens Focus adjustment window (test pattern). Then adjust the focus of the picture by pressing the M/m/