Sony VPL-VW5000ES Operating Instructions - Page 13
Using the Picture Position
View all Sony VPL-VW5000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
2 Put on the 3D glasses. Precautions for use Misoperation may occur if: • The viewing position is too far from the projector • There are other communication devices, such as a wireless LAN (IEEE802.11 b/g/n) or a microwave with a bandwidth of 2.4 GHz, near the unit 3D glasses communication range The following figure indicates the communication range of the 3D glasses. If you try to watch 3D video images from a distance greater than the communication range or install the unit outside the communication range, the 3D glasses may not be able to display the images properly. Also, the distance varies depending on the environment of the room and installation environment of the unit. Top or side view Projector Using the Picture Position You can store up to five combinations of lens settings (focus, picture size, picture position), aspect ratio, and blanking. These settings can be recalled. 1 Press POSITION. The Picture Position selecting palette is displayed. 10 m 10 m 10 m 10 m 2 Press POSITION repeatedly, or press M/m/ to select the position. The settings of the position selected is recalled. Store or delete lens settings, aspect ratio, and blanking in the "Picture Position" of the Screen menu (page 24). The position where the lens settings, aspect ratio, and blanking are not stored is displayed as "---." Image of the lens moving In the example below, the images with aspect ratio of 1.78:1 (16:9) and 2.35:1 are projected on a 2.35:1 screen. When a 1.78:1 (16:9) image is input When a 2.35:1 image is input Press the POSITION button. The 2.35:1 image expands to fill the screen. 13