Sony VPL-VW500ES Startup Guide - Page 42
Error Handling, Warning Indicators - lamp life
View all Sony VPL-VW500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Error Handling Warning Indicators The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with your projector. ON/STANDBY indicator WARNING indicator Flashing/Lighting indicators The number of flashes Twice Three times (Flashes in red) Twice Three times (Flashes in red) (Flashes in red) Both indicators flash Cause and Remedy Close the lamp cover securely, then tighten the screws securely. The temperature of lamp is unusually high. Turn off the power and wait for the lamp to cool, then turn on the power again. If the symptom persists, the lamp may be at the end of its service life. In this case, replace the lamp with a new one. The internal temperature is unusually high. Check to ensure that if nothing is blocking the ventilation holes or whether or not the unit is being used at high altitudes. The fan is broken. Consult with qualified Sony personnel. Note When a warning indicator other than the above starts flashing, and the symptom persists even after carrying out the above methods, consult with qualified Sony personnel. GB 18 If there is any problem or an error message appears on the screen, refer to "Error Handling" in the Operating Instructions contained in the supplied CD-ROM.