Sony VPL-VW590ES Operating Instructions - Page 55
Specifications
View all Sony VPL-VW590ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Specifications Item Display system Display device Projection lens Size of effective display area Number of pixels Light source Screen size Accepted digital signals HDMI (2 inputs), HDCP compliant Other inputs/ outputs TRIGGER (2 connectors) REMOTE LAN IR IN USB Outside dimensions (w/h/d) Mass Power requirements Power consumption Power consumption Standby Networked Standby Operating temperature Operating humidity Storage temperature Storage humidity Supplied accessories Optional accessories Description SXRD panel, projection system 0.74-inch (18.8 mm) SXRD 26,542,080 pixels (8,847,360 pixels × 3) 2.06 times zoom lens (motorized) f = 21.7 mm to 44.7 mm F3.0 to F4.0 Ultra High Pressure Lamp 280 W type 60 inches to 300 inches (1,524 mm to 7,620 mm) (measured diagonally) See "Preset Signals" (page 56). RGB Y PB/CB PR/CR Minijack, DC 12 V Max. 100 mA RS-232C: D-sub 9-pin (male) RJ45, 10BASE-T/100BASE-TX Minijack DC 5 V, Max. 500 mA 495.6 18 1/4 mm × 205.3 mm inches) (without × 463.6 mm protrusions) (19 1/2 × 8 3/32 × Approx. 14 kg (31 lb) AC 100 V to 240 V, 4.6 A to 2.0 A, 50/60 Hz 460 W 0.4 W (when "Remote Start" is set to "Off") 1.0 W (LAN) (when "Remote Start" is set to "On") When a LAN terminal is not connected, it becomes a low power consumption mode (0.5 W). 5°C to 35°C (41°F to 95°F) 35% to 85% (no condensation) -20°C to +60°C (-4°F to +140°F) 10% to 90% See "Checking the Supplied Accessories" in the supplied Quick Reference Manual. Projector Lamp: LMP-H280 (for replacement) Projector Suspension Support: PSS-H10 55