Sony VPL-VW600ES Operating Instructions - Page 10
To adjust the vertical position, To adjust the tilt of the installation, surface, Side view
View all Sony VPL-VW600ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
To adjust the vertical position Press M/m. The picture projected on the screen moves up by a maximum of 85% or moves down by a maximum of 80% of the screen height from the center of the lens. Side view 85% Range of movement of the projected picture 0.85V 0.31H 0.31H Projected Picture 0.8V H: Width of the projected picture V: Height of the projected picture 1 screen height 80% : Picture position when moving the picture upward at maximum : Picture position when moving the picture downward at maximum Note The range to move the picture projected on the screen can be adjusted only within the octagon area illustrated below. For details, see "Projection Distance and Lens Shift Range" (page 60). To adjust the tilt of the installation surface If the unit is installed on an uneven surface, use the front feet (adjustable) to keep the unit level. 10 Adjusting the Picture Position Turn to Front feet (adjustable) adjust. Notes • If the unit is tilted up or down, the projected image may be trapezoidal. • Be careful not to catch your finger when turning the front feet (adjustable).