Sony VPL-VW695ES Startup Guide - Page 19
For the customers in, the U.S.A. and Canada, Lamp contains, mercury. Dispose, according to applicable
View all Sony VPL-VW695ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
9 Wipe dust off the ventilation holes (intake) with a soft cloth. Ventilation holes (intake) • The unit will not turn on unless the lamp cover are securely closed. • To clear a message displayed on the screen, press any button either on the remote control or the control panel of the unit once. Note on replacing the lamp when broken, in the case of a ceiling installation If the lamp breaks, broken lamp pieces may scatter and cause injury. When the unit is on the ceiling, remove the lamp door (inner cover) by sliding it horizontally slowly after raising it with 30 degree opened. Avoid twisting the lamp door (inner cover). 10Turn on the unit, then select the lamp setting item on the Setup menu. The menu screen below will be appeared. Tip If "Settings Lock" is set to "Level B," set to "Off" once. 11Select "Yes." Caution Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid electrical shock or fire. Notes • The unit will not turn on unless the lamp is securely installed in place. Note The lamp contains mercury. The disposal rules for used fluorescent tubes depend on where you live. Follow the waste disposal policy in your area. Disposal of the used lamp For the customers in the U.S.A. and Canada Lamp contains mercury. Dispose according to applicable local, state/province and federal laws. For additional information, see www.sony.com/ mercury 19 GB