Sony VPL-VW915ES Operating Instructions - Page 12

Using the 3D Glasses 1 Turn on the 3D glasses, and register them on the unit. For details on how to register the 3D glasses, refer to the operating instructions supplied with the 3D glasses. 2 Put on the 3D glasses. 3 Turn toward the screen. Precautions for use Misoperation may occur if: • The viewing position is too far from the projector • There are other communication devices, such as a wireless LAN (IEEE802.11 b/g/n) or a microwave with a bandwidth of 2.4 GHz, near the unit 3D glasses communication range The following figure indicates the communication range of the 3D glasses. If you try to watch 3D video images from a distance greater than the communication range or install the unit outside the communication range, the 3D glasses may not be able to display the images properly. Also, the distance varies depending on the environment of the room and installation environment of the unit. Top or side view Projector 10 m 10 m 10 m Using the Picture Position You can store up to five combinations of lens settings (focus, picture size, picture position), aspect ratio, and blanking. These settings can be recalled. In the factory preset setting, the Picture Position is not stored. 1 Press POSITION. The Picture Position selecting palette is displayed. 2 Press POSITION repeatedly, or press M/m/ to select the position. The settings of the position selected is recalled. Store or delete lens settings, aspect ratio, and blanking in the "Picture Position" of the Screen menu (page 24). The position where the lens settings, aspect ratio, and blanking are not stored is displayed as "---." Tip To hide the reminder displayed on the screen when the position is read out, set "Status" to "Off" on the Setup menu. 10 m 12