Sony VPL-VZ1000 Quick Reference Manual - Page 7

Adjusting

Get Sony VPL-VZ1000 PDF manuals and user guides View all Sony VPL-VZ1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Step 2 Adjusting Remote control detector Image distortion Installation state to the projection surface (Top view) a b a > b a b a < b 3 Check if the lower side of the picture is horizontal. If not, use the left/right feet (adjustable) to keep the unit level. For details on adjusting the feet, see page 9. Image distortion Feet adjustment Tip When adjusting the lens, each time you press the PATTERN button of the remote control or the LENS button on the unit, the lens adjustment function switches as follows. 1 Press the PATTERN button to display the Lens Focus adjustment window, and adjust the focus of the picture by pressing the M/m/ 90° 7 Adjusting US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
Adjusting
7
US
Tip
When adjusting the lens, each time you press the PATTERN button
of the remote control or the LENS button on the unit, the lens
adjustment function switches as follows.
1
Press the PATTERN button to display the Lens Focus
adjustment window, and adjust the focus of the picture
by pressing the
M/m/</,
buttons.
Tips
•
The factory default for focus has been adjusted to the 100-
inch screen. Make fine adjustments according to the screen
size and installing position.
•
Adjust by checking the entire test pattern. The amplitude of
the pattern focus on the top of the picture becomes large with
the ultra short focus projector.
•
If you press the RESET button on the remote control while
the Lens Focus adjustment window is displayed, the focus
setting returns to the factory default.
•
Whenever you press the
button, the test pattern
disappears.
2
Check if the upper side and lower side of the picture
are parallel.
If not, install the unit in a position parallel to the
projection surface (a=b).
3
Check if the lower side of the picture is horizontal.
If not, use the left/right feet (adjustable) to keep the
unit level. For details on adjusting the feet, see page 9.
4
Check if the left side and right side of the picture are
vertical.
If not, use the feet (adjustable) to keep the unit vertical
to the projection surface. For details on adjusting the
feet, see page 9.
Adjusting
Step 2
Remote control detector
Image distortion
Installation state to the projection surface
(Top view)
Image distortion
Feet adjustment
Image distortion
Feet adjustment
a
b
a > b
a
b
a < b
c > 90°
Side view