Sony WE475 Operating Instructions - Page 6

Getting Started Hooking up the system This section describes how to hook up the tape deck to an amplifier or a CD player equipped with CONTROL A1II connectors. Be sure to turn off the power of each component before making the connections. Hookups Amplifier CD player to an AC outlet Connecting the tape deck to an amplifier Connect the amplifier to the IN/OUT connectors using the supplied audio connecting cords. When connecting an audio connecting cord, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise. Connecting the tape deck to a CD player equipped with CONTROL A1II connectors For details, see "Using the CONTROL A1II control system" on page 17. 6 Setting the voltage selector (only on models supplied with a voltage selector) Check that the voltage selector on the rear panel of the tape deck is set to the local power line voltage. If not, set the selector to the correct position using a screwdriver before connecting the AC power cord to an AC outlet. VOLTAGE 220V 230 - 240V 120V Connecting the AC power cord Connect the AC power cord to an AC outlet.