Sony WF-C700N Help Guide - Page 30

Help Guide Wireless Noise Canceling Stereo Headset WF-C700N Turning on the headset When the headset is stored in the charging case 1 Remove the headset from the charging case. The headset turns on automatically. When you remove only one headset unit from the charging case, only the removed unit turns on. When the headset is not stored in the charging case After 15 minutes of Bluetooth disconnection, the headset turns off. In this case, the headset will turn on by pressing and holding the buttons on both headset units for about 2 seconds or more. The headset units will also turn on when they are set into the charging case and then removed from the charging case. By using the "Sony | Headphones Connect" app, you can set the time until the headset turns off automatically. You can also set the headset not to turn off automatically. When the headset is turned on When both headset units are removed from the charging case, the connection is established between the left and right headset units. When turning on the headset for the first time after purchase or just after initializing the headset, the headset goes into Bluetooth pairing mode. If you press the button on the left or right unit when the headset is not connected via a Bluetooth connection, you will hear a notification sound indicating that the headset is turned on. When you use the headset for the first time after purchase or just after initializing the headset, the noise canceling function is turned on automatically. If the noise canceling settings were changed previously, the settings are retained. Related Topic Using only one headset unit Turning off the headset What you can do with the "Sony | Headphones Connect" app 5-047-128-11(1) Copyright 2023 Sony Corporation 30