Sony XBR-55X900C Reference Guide - Page 5
sure to follow the three measures recommended., Screw hole on the rear cover - stand
View all Sony XBR-55X900C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2 Remove the screws from the rear of the TV. 4 Anchor the TV to the wall by using bolts, wall anchor and chain (or rope). M6 eye bolts (not supplied) Rope or chain (not supplied) 3 Secure the TV to the Stand. Use the optional hardware listed as follows (not supplied): • M6 eye bolt (screwed into the TV's rear cover) • A screw or similar (attach it to the Stand) • Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain. Screw hole on the rear cover M6 eye bolt (not supplied) US Screw holes Wall-anchor (not supplied) Rope or chain (not supplied) Please see below illustration for M6 eye bolt length. 8-12 mm Screw (not supplied) The length of the M6 eye bolt differs depending on the rope or chain diameter. Please see below illustration. 8-12 mm 18 mm or more Use the rope or chain for attaching the Table-Top Stand to middle position, see page 14-15. 4-5 mm M5 18 mm or more Note • Your TV is shipped with screws attached to the rear of the TV depending on the TV model. (They are fastened in the screw holes for wall mounting.) Be sure to remove the upper two screws prior to anchoring the TV to a wall. • Securing the TV to the stand without securing the TV and the stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended. 5US