Sony XBR-55X900H Reference Guide - Page 8

Using the optional Wall-Mount Bracket, Except SU-WL855 not supplied

Page 8 highlights

• The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. Please refer to below illustration. 10 mm - 12 mm Screw (M6) Wall-Mount Bracket VS • Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children. * Only on limited region/country/TV model. Note • Read the supplied Safety Booklet for additional safety information. Remove the screws from the rear of the TV. Using the optional Wall-Mount Bracket (Except SU-WL855) (not supplied) This TV's instruction manual only provides the steps to prepare the TV for Wall-Mount installation before it is installed on the wall. Your TV can be mounted to a wall using a suitable Wall-Mount Bracket (not supplied). If the Table-Top Stand is attached to the TV, the TV may require detaching the Table-Top Stand; see "Detaching the Table-Top Stand from the TV". Prepare the TV for the Wall-Mount Bracket before making cable connections. For product protection and safety reasons, Sony strongly recommends that installation of your TV on the wall be performed by qualified professionals. Do not attempt to install it yourself. • Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. • The screws for Wall-Mount Bracket are not supplied. • The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. Please refer to below illustration. 10 mm - 12 mm Screw (M6) Wall-Mount Bracket VS • Refer to the following table for wall-mount hole pattern. Model Name XBR-85X900H / 85X90CH XBR-75X900H / 75X90CH XBR-65X900H / 65X90CH XBR-55X900H / 55X90CH Wall-mount hole pattern × 400 × 400 mm 300 × 300 mm 300 × 300 mm 300 × 300 mm • Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children. 8US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
10 mm – 12 mm
VS
Screw (M6)
Wall-Mount Bracket
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
* Only on limited region/country/TV model.
Note
• Read the supplied Safety Booklet for additional
safety information.
Remove the screws from the rear of the
TV.
Using the optional Wall-Mount Bracket
(Except SU-WL855) (not supplied)
This TV’s instruction manual only provides
the steps to prepare the TV for Wall-Mount
installation before it is installed on the wall.
Your TV can be mounted to a wall using a
suitable Wall-Mount Bracket (not supplied).
If the Table-Top Stand is attached to the TV,
the TV may require detaching the Table-Top
Stand; see “Detaching the Table-Top Stand
from the TV”.
Prepare the TV for the Wall-Mount Bracket
before making cable connections.
For product protection and safety
reasons, Sony strongly recommends that
installation of your TV on the wall be
performed by qualified professionals. Do
not attempt to install it yourself.
• Follow the instruction guide provided
with the Wall-Mount Bracket for your
model. Sufficient expertise is required in
installing this TV, especially to determine
the strength of the wall for withstanding
the TV’s weight.
• The screws for Wall-Mount Bracket are
not supplied.
• The length of the screw for Wall-Mount
Bracket differs depending on the
Wall-Mount Bracket thickness. Please
refer to below illustration.
10 mm – 12 mm
VS
Screw (M6)
Wall-Mount Bracket
• Refer to the following table for
wall-mount hole pattern.
Wall-mount hole
Model Name
pattern
×
XBR-85X900H /
400 × 400 mm
85X90CH
XBR-75X900H /
300 × 300 mm
75X90CH
XBR-65X900H /
300 × 300 mm
65X90CH
XBR-55X900H /
300 × 300 mm
55X90CH
• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
8
US