Sony XBR-65X900B User Manual - Page 70

[3D (Side-by-Side)]: Displays side-by-side pictures in 3D. [3D (Over-Under)]: Displays over-under pictures in 3D. [3D (Simulated 3D)]: Displays regular 2D pictures in simulated 3D. [2D (Left-Only)]: When the same picture is side-by-side, the left side picture is shown expanded, in 2D. [2D (Top-Only)]: When the same picture is over-under, the upper picture is shown expanded, in 2D. Depending on the input signal or format, [3D (Side-by-Side)]/[3D (Over-Under)]/[2D (Left-Only)]/[2D (Top-Only)] may not be selectable. To turn off the Active 3D Glasses Press down on the (power) button of the Active 3D Glasses for 2 seconds. If no signal from the TV is detected for more than 1 minute, the Active 3D Glasses will turn off automatically. To turn them on again, press the (power) button. To use the Active 3D Glasses with another TV It is required to re-register the Active 3D Glasses. Turn off the Active 3D Glasses, then perform step 2. To deactivate the 3D effect Press the 3D button repeatedly to select [Off] in [3D Display]. (When using the Touchpad Remote Control, press the Control Bar ( ), slide the touchpad to highlight the 3D button, press the touchpad, slide the touchpad to highlight [Off] in [3D Display], then press the touchpad.) To use the SimulView™ mode (The availability of this function depends on your model.) SimulView™ allows two players to view independent screen images in full screen while playing the same game on a shared screen. The image is displayed in 2D. To use this feature, the game software must support SimulView™. When using this mode, the Active 3D Glasses automatically change to SimulView™ mode. Press the button on the Active 3D Glasses to switch between players as follows. Mode: SimulView™ mode (Player 1) ←→ SimulView™ mode (Player 2) Indicator: Yellow LED blinks once every 2 seconds with SimulView™ mode (Player 1) ←→ Yellow LED blinks twice every 2 seconds with SimulView™ mode (Player 2) 64