Sony XCDSX90 Product Brochure (xcd_series) - Page 4

Specifications XCD-U100 XCD-U100CR XCD-SX90 XCD-SX90CR XCD-V60 XCD-V60CR Image device 1/1.8-type progressive scan IT CCD 1/3-type progressive scan IT CCD Standard picture size (H x V) 1600 x 1200 (UXGA) 1280 x 960 (SXGA) 640 x 480 (VGA) Cell size 4.4 x 4.4 µm 3.75 x 3.75 µm 7.4 x 7.4 µm Resolution depth Mono 8: 8 bits/pixel Raw 8: 8 bits/pixel Mono 8: 8 bits/pixel Raw 8: 8 bits/pixel Mono 8: 8 bits/pixel Raw 8: 8 bits/pixel Mono 16: 10 bits/pixel Raw 16: 10 bits/pixel Mono 16: 10 bits/pixel Raw 16: 10 bits/pixel Mono 16: 10 bits/pixel Raw 16: 10 bits/pixel Lens mount C mount Digital interface IEEE1394b-2002 x2, bilingual (screw lock possible) Transfer rate 800 / 400 / 200 / 100 Mb/s Max. Frame rate (at full resolution) 15 fps 30 fps 90 fps Gain control Manual 0 to 24 dB, Manual 0 to 18 dB, Manual 0 to 24 dB, Manual 0 to 18 dB, Manual 0 to 24 dB, Manual 0 to 18 dB, Auto gain Auto gain Auto gain Auto gain Auto gain Auto gain Shutter speed 1/100,000 to 16s, Auto shutter External trigger shutter Trigger start (Mode 0), Trigger start and exposure duration (Mode 1), Programmable trigger (via the IEEE1394 bus), Trigger inhibit setting, Trigger/Strobe delay setting, Single/Bulk trigger mode Image memory 16 MB Memory channel 15 channels for parameter settings Broadcast delivery Camera setting, Software trigger via IEEE1394 bus Readout features Partial Scanning, Partial Scanning, LUT, Binning, LUT, 3x3 filter Bayer Pattern Arrangement, AWB Partial Scanning, Partial Scanning, LUT, Binning, LUT, 3x3 filter Bayer Pattern Arrangement, AWB Partial Scanning, Partial Scanning, LUT, Binning, LUT, 3x3 filter Bayer Pattern Arrangement, AWB Power requirements DC 8 to 30 V (via IEEE1394b 9-pin cable or 12-pin camera cable) Power consumption 3.0 W (Typ.) 2.8 W (Typ.) 2.8 W (Typ.) Dimensions (W x H x D) 1 3/4 x 1 5/16 x 2 3/8 inches (44 x 33 x 57.5 mm) (not including protruding parts) Weight 5 oz (140 g) Operating temperature 23 to 113 ºF (-5 to 45 ºC) Storage temperature -22 to 140 ºF (-30 to 60 ºC) Operating humidity 20 to 80% (no condensation) Storage humidity 20 to 95% (no condensation) Vibration resistance 10 G (20 to 200 Hz) Shock resistance 70 G Supplied accessories Lens mount cap, Operating instructions Dimensions 1 1/16 (26) 2-M3, depth 4 1 (44) 17/32 (13) (11/32)(8) 2 5/8 (65.5) 2 3/8 (57.5) 12-pin connector Pin Assignment 12-pin EIAJ connector Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 DC IN (Ground) DC IN ISO GND Strobe OUT (Isolated) GPIO OUT 1- (Isolated) GPIO OUT 1+ (Isolated) GPIO IN 1+ (Isolated) GPIO OUT 2- (Isolated) GPIO OUT 2+ (Isolated) GPIO IN 2+ (Isolated) Trigger IN ISO GND 1 5/16 (33) 1 1/16 (26) 17/32 (13) 4-M3, depth 4 2 (50) IEEE-1394.b (screw connectors) Unit: inches (mm) Optional Accessories Tripod Adapter VCT-ST70I Isolated type Weight: Approx. 0.5 oz (14 g) Dimensions (W x H x D): 1 5/8 x 1/4 x 2 3/8 inches (40 x 6 x 59 mm) Camara Adaptor DC-700 Cables CCXC-12P02N CCXC-12P10N CCXC-12P05N CCXC-12P25N Sony Electronics Inc. 1 Sony Drive Park Ridge, NJ 07656 www.sony.com/videocameras IS-1204 (MK10450V1IW07OCT) © 2007 Sony Corporation. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Design, features, and specifications are subject to change without notice. All non-metric weights and measurements are approximate. Sony is a registered trademark of Sony Corporation. All other trademarks are the properties of their respective owners. Printed in USA (11/07)