Sony XCGH280CR Brochure (XCGH280 Series Gig E Camera Brochure) - Page 2

Specifications Camera Image Sensor Image Sensor (Number of Effective Pixels, H x V) Cell Size (H x V) Output Pixels (H x V) Output Pixels (H x V, Full Resolution) Color Filter Frame Rate Minimum Illumination (50%) Sensitivity S/N Ratio Gain Shutter Speed White Balance Camera Features Readout Modes Readout Features Synchronization Trigger Modes Chunk Data Memory Channel (Usersets) User Memory Image Buffer Other Features Interfaces Video Data Output Digital Interface Camera Specification Digital Input/Output General Lens Mount Power Requirements Power Consumption Operating Temperature Performance Guarantee Temperature Storage Temperature Operating Humidity Storage Humidity Shock Resistance Dimensions (W X H X D) Weight Regulations Supplied Accessories XCG-H280E 2/3-type progressive scan IT CCD 1,940 x 1,460 4.54 µm x 4.54 µm 1,920 x 1,080 1,920 x 1,440 - 32 fps @ 1,920 (H) x 1,080 (V), 2ch 0.5 lx (Iris: F1.4, Gain: +18 dB, Shutter: 1/32 s) F8 (400 lx, Gain: 0 dB) 1 step (Lens close, Gain: 0 dB, 8 bits) Auto, Manual : 0 dB to +18 dB 2 s to 1/100,000 s, Auto - Normal, Binning (2 x 2, 1 x 2, 2 x 1), Partial scan Gamma (variable), Built-in test pattern Hardware trigger, Software trigger Edge detection, Pulse width detection, Bulk trigger, Sequential trigger Trigger counter, GPI status, etc. 16 channels 64 bytes x 16 channels 16 frames Internal temperature sensor 8, 10, 12-bit, digital Gigabit Ethernet (1000BASE-T) GigE Vision® Version 1.2 TTL IN (x2), TTL OUT (x2) C mount DC +12 V (+10.5 V to +15.0 V) 5.8 W (max.) 14°F to +122°F (-10°C to +50°C) 0°C to 40°C (32°F to 104°F) -22°F to +140°F (-30°C to +60°C) 20% to 80% (no condensation) 20% to 95% (no condensation) 70 G 2 x 2 x 2 3/8 inches (50 x 50 x 57.5 mm) (excluding protrusions) 7.1 oz (200 g) UL2044, FCC Class A, CE: EN55022, AS/NZ: EN55022, VCCI Class A, KC: KN22/KN24 Class A Lens mount cap (1), Connector plug 2P (1), Operating instructions (1) XCG-H280CR 2/3-type progressive scan IT CCD 1,940 x 1,460 4.54 µm x 4.54 µm 1,920 x 1,080 1,920 x 1,440 Elementary color mosaic 32 fps @ 1,920 (H) x 1,080 (V), 2ch 6 lx (Iris: F1.4, Gain: +18 dB, Shutter: 1/32 s) F8 (2000 lx, Gain: 0 dB) 1 step (Lens close, Gain: 0 dB, 8 bits) Auto, Manual : 0 dB to +18 dB 2 s to 1/100,000 s, Auto One push WB, Manual Normal, Partial scan Gamma (variable), Built-in test pattern Hardware trigger, Software trigger Edge detection, Pulse width detection, Bulk trigger, Sequential trigger Trigger counter, GPI status, etc. 16 channels 64 bytes x 16 channels 16 frames Internal temperature sensor 8, 10, 12-bit RAW, digital Gigabit Ethernet (1000BASE-T) GigE Vision® Version 1.2 TTL IN (x2), TTL OUT (x2) C mount DC +12 V (+10.5 V to +15.0 V) 5.8 W (max.) 14°F to + 122°F (-10°C to +50°C) 0°C to 40°C (32°F to 104°F) -22°F to +140°F 20% to 80% (no condensation) 20% to 95% (no condensation) 70 G 2 x 2 x 2 3/8 inches (50 x 50 x 57.5 mm) (excluding protrusions) 7.1 oz (200 g) UL2044, FCC Class A, CE: EN55022, AS/NZ: EN55022, VCCI Class A, KC: KN22/KN24 Class A Lens mount cap (1), Connector plug 2P (1), Operating instructions (1) PIN ASSIGNMENTs DC IN connector Pin No. 1 DC IN 2 GND I/O connector Pin No. 1 GPIO OUT (1) 2 GPIO OUT (2) 3 Trigger IN (1) 4 Trigger IN (2) 5 GPIO IN (1) 6 GPIO IN (2) 7 GND *GPIO OUT is selectable from Exposure output/Strobe control signal/GPIO output. 50 (2) 40 (1 5/8) Dimensions 7/16 (10.5) 1 1/16 (26) 2-M3 DEPTH 3/16 (4) 2 (50) 1 5/8 (40) 2 5/8 (65.5) 2 3/8 (57.5) OPTIONAL ACCESSORY 4-M3 DEPTH 3/16 (4) 7/16 (10.5) 2 (50) 1 1/16 (26) Tripod Adapto VCT-ST70I 4-M3 DEPTH 3/16 (4) Unit: inches (mm) Sony Electronics Inc. 1 Sony Drive Park Ridge, NJ 07656 sony.com/videocameras IS-1247 (MK10895V1) ©2012 Sony Corporation. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. The values for mass and dimensions are approximate. "SONY", "make.believe" and "EXview HAD CCD II" are registered trademarks of Sony Corporation. All other trademarks are the property of their respective owners. Printed in USA (1/12)