Sony XCGU100CR Brochure (Brochure) - Page 2

Specifications XCG-5005CR XCG-U100CR Camera Image sensor 2/3-type progressive scan IT CCD 1/1.8-type progressive scan IT CCD Standard output pixels 2,448H x 2,048V 1,600H x 1,200V Standard frame rate 15 fps 27 fps Cell size (H x V) 3.45 x 3.45 µm 4.4 x 4.4 µm Color filter Elementary color mosaic Elementary color mosaic Minimum illumination 6 lx (F1.4, +18 dB, Shutter: off, 50% video level) 6 lx (F1.4, +18 dB, Shutter: off, 50% video level) Sensitivity 2000 lx at F8 (0 dB) 2000 lx at F5.6 (0 dB) Gain Auto/Manual (0 dB to +18 dB) Auto/Manual (0 dB to +18 dB) Shutter speed 2 sec to 1/100,000 sec 2 sec to 1/100,000 sec Camera Features Video output resolution depth RAW 8: 8 bits/pixel RAW 10: 10 bits/pixel RAW 12: 12 bits/pixel RAW 8: 8 bits/pixel RAW 10: 10 bits/pixel RAW 12: 12 bits/pixel Readout modes Normal, Partial scan Normal, Partial Scan White balance One Push WB, Manual One Push WB, Manual Readout features Gamma (variable), Built-in test pattern Gamma (variable), Built-in test pattern Synchronization Hardware trigger / Software trigger, Trigger start / Trigger start and exposure duration, Bulk / Sequential trigger mode,Trigger inhibit setting, Trigger delay setting/Strobe controll Hardware trigger / Software trigger, Trigger start / Trigger start and exposure duration, Bulk / Sequential trigger mode,Trigger inhibit setting, Trigger delay setting/Strobe controll Memory channel 16 channels for parameter settings 16 channels for parameter settings User memory 1024 Byte 1024 Byte Interfaces Video output Gigabit Ethernet (1000Base-T) Gigabit Ethernet (1000Base-T) Digital I/Os ISO IN (1x), ISO OUT (1x), TTL OUT (1x) ISO IN (1x), ISO OUT (1x), TTL OUT (1x) General Lens mount C mount C mount Power requirements DC +12 V (+10.5 V to +15.0 V) DC +12 V (+10.5 V to +15.0 V) Power consumption 4.3 W 3.5 W Operating temperature 14°F to 122°F (-10°C to +50°C) 14°F to 122°F (-10°C to +50°C) Storage temperature -22°F to +140°F (-30°C to +60°C) -22°F to +140°F (-30°C to +60°C) Operating humidity 20% to 80% (no condensation) 20% to 80% (no condensation) Storage humidity 20% to 95% (no condensation) 20% to 95% (no condensation) Vibration resistance 10 G (20 Hz to 200 Hz) 10 G (20 Hz to 200 Hz) Shock resistance 70 G 70 G Dimensions (W x H x D) 1 3/4 x 1 5/16 x 2 3/4 inches (44 x 33 x 67.5 mm) (not including protruding parts) 1 3/4 x 1 5/16 x 2 3/4 inches (44 x 33 x 67.5 mm) (not including protruding parts) Weight 5 oz (145 g) 5 oz (145 g) Regulations UL2044, FCC Class A, CE: EN55022, UL2044, FCC Class A, CE: EN55022, AS/NZ: EN55022, VCCI: Class A AS/NZ: EN55022, VCCI: Class A PIN ASSIGNMENT 12-pin connector Pin No. 1 GND 2 DC IN 3 GND 19 2 10 8 4 Multi-function output* (TTL) 5 Multi-function output* (ISO-) 6 Multi-function output* (ISO+) 7 GPIO input (ISO+) 3 11 12 7 456 8 GND 9 NC 10 NC 11 Trigger input 12 GPIO input (ISO-) *Multi-funciton output Exposure output/Strobe control signal/GPIO output OPTIONAL ACCESSORIES Tripod Adaptor Camera Adaptors Cables VCT-ST70I DC-700 CCXC-12P02N CCXC-12P05N CCXC-12P10N Dimensions 1 1/16 (26) 2-M3 DEPTH 3/16 (4) 1 3/4 (44) 11/32 (8) 17/32 (13) 3 (75.5) 2 7/8 (67.5) 13/16 (20) 2-M2 DEPTH 3/16 (4) 1 5/16 (33) 17/32 (13) 4-M3 DEPTH 3/16 (4) 1 3/8 (60) 1 1/2 (37.5) 2-M2 DEPTH 1/8 (2.6) 1 (25) 1 1/16 (26) Unit: inches (mm) Sony Electronics Inc. 1 Sony Drive Park Ridge, NJ 07656 sony.com/videocameras IS-1241 (MK10812V1) ©2011 Sony Corporation. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications are subject to change without notice. The values for weight and dimension are approximate. "SONY" and "make.believe" are registered trademarks of Sony Corporation. All other trademarks are the property of their respective owners. Printed in USA (6/11)