Sony XM-2252HX Marketing Specifications & Dimensions - Page 1

2000 MOBILE PRODUCT GUIDE - PART 2 XM-2252HX 2/1 Channel Amplifier • 225 W x 2 Ch at 0.04% THD at 4 Ω • 300 W x 2 Ch at 0.1% THD at 2 Ω • 600 W x 1 into 2 ohms at 0.1% THD 4 Ω • Discrete Dual Differential Inputs • Discrete MOSFET Outputs • Dual MOSFET Switching Power Supplies • Switchable Hi-Power/Hi-Current Mode • Variable 50-200 Hz Hi-Pass/Lo-Pass Filter • 40 Hz EQ Boost, Hi Level In, RCA Passthrough • Fan Cooling with DC Motor Specifications Circuit System OTL (output transformerless) Circuit Pulse Power Supply Inputs RCA Pin Jacks High Level Input Connector Outputs Speaker Terminals - through out pin jacks Speaker Impedance 1-8 ohms (stereo) 2-8 ohms (when used as bridging amplifier) Rated Outputs (at 14.4 VDC) Hi-Current/Hi-Voltage: 115/225 W x 2 (20-20 kHz, 0.04% THD), at 4 Ω ) 150/300 W x 2 (20-20 kHz, 0.1% THD), at 2 Ω ) 300/600 W x 1 (20-20 kHz, 0.1% THD), at 4 Ω ) Frequency Response Harmonic Distortion Input Level Adjustment Range 5-100 Hz (+0/-3 dB) 0.005% or less (at 1 kHz, 4 ohms) 0.2-4.0 V (RCA pin jack); 0.4-8.0 V (high level input) High-Pass Filter Low-Pass Filter Low Boost 50-200 Hz, -12 dB/oct 50-200 Hz, -12 dB/oct 0-10 dB (40 Hz) Power Requirements Power Supply Voltage Current Drain 12 V DC Car Battery (negative ground) 10.5-16 V At Rated Output: 55A (4ohm hi voltage mode) Remote Input: 2 mA Dimensions (w/h/d) Approx. 282 x 50 x 500 mm (111/8 x 2 x 193/4 in.) (not incl. projecting parts and controls) Weight Approx. 5.4 kg (11 lb. 15 oz.) (not including accessories) Supplied Accessories Mounting Screws (4); Terminal Cap (1) 24 Design and specifications subject to change without notice.