Sony XM-280GTX Marketing Specifications, Connections & Dimensions - Page 1

2003 SONY MOBILE PRODUCT GUIDE XM-280GTX 2/1 Channel Amplifier • 480W max power • 80W x 2 RMS into 4W, 20Hz-20kHz @ 0.08% THD • 200W x 1 RMS into 4W, 20Hz-20kHz @ 0.1% THD • Class A/B • Variable 50-300Hz Low Pass Filter • 40Hz EQ Boost • RCA & Speaker Level Inputs Audio Power Specifications POWER OUTPUT AND TOTAL HARMONIC DISTORTION 80 watts per channel minimum continuous average power into 4 ohms, both channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion per Car Audio Ad Hoc Committee standards Other Specifications Circuit system Inputs Outputs Suitable speaker impedance Maximum outputs Rated outputs (supply voltage at 14.4 V) Frequency response Harmonic distortion Input level adjustment range Low-pass filter Low boost Power supply voltage Current drain Dimensions Mass Supplied accessories OTL (output transformerless) circuit Pulse power supply RCA pin jacks High level input connector Speaker terminals Through out pin jacks 2 – 8 W (stereo) 4 – 8 W (when used as a bridging amplifier) 190 W × 2 (at 4 W) 240 W × 2 (at 2 W) 480 W (monaural) at 4 W 80 W × 2 (20 Hz – 20 kHz, 0.08% THD, at 4W) 100 W × 2 (20 Hz – 20 kHz, 0.1% THD, at 2W) 200 W (monaural) (20 Hz – 20 kHz, 0.1% THD, at 4W) 5 Hz – 50 kHz (+0.5dB, – 3 dB) 0.008% or less (at 1 kHz, 4W) 0.2 – 6.0 V (RCA pin jacks) 1.2 – 12.0 V (High level input) 50 – 300 Hz, –12 dB/oct 0 – 10 dB (40 Hz) 10.5 – 16 V at rated output : 20 A (at 4W) Remote input : 1 mA Approx. 286 × 55 × 196 mm (11 3/8 × 2 1/4 × 7 3/4 in.) (w/h/d) not incl. projecting parts and controls Approx. 2.5 kg (5 lb. 8 oz.) not incl. accessories Mounting screws (4) High level input cord (1) Protection cap (1) Design and Specifications subject to change without notice.