Sony XM-D400P5 Product Guide / Specifications - Page 1

2003 SONY MOBILE PRODUCT GUIDE • 800W max power • 200W x 1 RMS into 4W 20Hz - 300Hz @0.2% THD • 400W x 1 RMS into 2W 20Hz - 300Hz @0.6% THD • Class D • Variable 50 - 300Hz 12dB/oct Low Pass Filter • 40Hz EQ Boost • RCA and Speaker Level Inputs XM-D400P5 1 Channel Mono Amplifier Audio Power Specifications POWER OUTPUT AND TOTAL HARMONIC DISTORTION 200 watts minimum continuous average power into 4 ohms, 20 Hz to 300 Hz with no more than 0.2% total harmonic distortion per Car Audio Ad Hoc Committee Standards. Other Specifications Circuit system Inputs Input level adjustment range Outputs Suitable speaker impedance Maximum outputs Rated outputs (supply voltage at 14.4 V) Frequency response Harmonic distortion Low-pass filter Low Boost Power requirements Power supply voltage Current drain Dimensions Mass Supplied accessories Class D Technology Pulse power supply RCA pin jacks High level input connector 0.3 – 6.0 V (RCA pin jacks) 1.2 – 12.0 V (high level input) Speaker terminals, Through out pin jacks 2 – 8 W 400 W (at 4 W) 800 W (at 2 W) 200 W (20 Hz - 300 Hz, 0.2% THD, at 4 W) 400 W (20 Hz - 300 Hz, 0.6% THD, at 2 W) 5 Hz – 300 Hz (+0.5 dB, -3 dB) 0.06% or less (at 100 Hz, 4 W) 50 - 300 Hz, –12 dB/oct 0 - 10 dB (40 Hz) 12 V DC car battery (negative ground) 10.5 – 16 V at rated output: 62 A (at 2 W) Remote input: 2 mA Approx. 295 × 57 × 290 mm (11 5/8 × 2 1/4 × 11 1/2) (w/h/d) not incl. projecting parts and controls Approx. 2.8 kg (6 lb. 3 oz.) not incl. accessories Mounting screws (5) High level input cord (1) Protection cap (1) Design and Specifications subject to change without notice.