Sony XS-TL1 Product Specifications - Page 1

Sony XS-TL1 - 5 1/4" 2 Way Speaker Manual

Page 1 highlights

1998 MOBILE ES PRODUCT GUIDE XS-TL1 Digitally Powered Subwoofer Amplifier Board Ω 63/4" Aluminum Cone Driver w/Rubber Surround Ω 1 ohm Voicecoil Matched to Digital Amp Ω Compact Vent-loaded Enclosure only 16" High Ω Vertical or Horizontal Mount Bracket Supplied Ω Preamp and High Level (speaker) Inputs Speaker Section Speaker Type Woofer 16 cm (61/2"), Aluminum cone type Impedance 1 ohm Power Amplifier Section Circuit System PWM (pulse width modulation) circuit Inputs RCA pin jacks; high level input cords Outputs RCA pin jacks (pass-through) Maximum Outputs 100 W Rated Outputs 50 W (1% THD) Input Level Adj. Range 0.2 - 2.0 V (RCA pin) 0.8 - 8.0 V (High level input) Cut-off Frequency 50 - 140 Hz Low Boost 0 - 10 dB (50 Hz) Power Requirements 12 V DC car battery (negative ground) Current Drain At rated output: 5A System Section Frequency Response 35 Hz - 200 Hz Mass Approx. 3.6 kg (16 lb. 15 oz.) Supplied Accessories Parts for installation and connections (1 set) Ω High Efficiency Class D PWM Amplifier Ω 50W x 1Ch at 1 ohm Ω Adjustable 50-180Hz Lo-Pass Filter Ω Adjustable 50Hz EQ (0 to +10dB) Ω Adjustable Output Level & Phase Dimensions Height: 405 mm (approx 1515/16 in) Width (Diameter): 200 mm (approx 77/8 in) Harness Plug Configuration Plug Shown With Wires Facing Viewer Pin Number Wire Color 1 Black 2 Blue 3 Black (RCA) 4 Black (RCA) 5 Black (RCA) 6 Black (RCA) 7 Gray/Black 8 White/Black 9 Black 10 Yellow 11 Red (RCA) 12 White (RCA) 13 Red (RCA) 14 White (RCA) 15 Gray 16 White Description Ground Remote Input Aux Input Right Neg Aux Input Left Neg Line Out Right Neg Line Output Left Neg Hi-Level-In Right Neg Hi-Level-In Left Neg Ground Battery + Aux Input Right Pos Aux Input Left Pos Line Out Right Pos Line Output Left Pos Hi-Level-In Right Pos Hi-Level-In Left Pos Design and specifications subject to change without notice. 42

  • 1

1998 MOBILE ES PRODUCT GUIDE
42
Speaker Section
Speaker Type
Impedance
Circuit System
Inputs
Outputs
Maximum Outputs
Rated Outputs
Input Level Adj. Range
Cut-off Frequency
Low Boost
Power Requirements
Current Drain
Frequency Response
Mass
Supplied Accessories
Woofer
16 cm (6
1
/
2
"), Aluminum cone type
1 ohm
PWM (pulse width modulation) circuit
RCA pin jacks; high level input cords
RCA pin jacks (pass-through)
100 W
50 W (1% THD)
0.2 - 2.0 V (RCA pin)
0.8 - 8.0 V (High level input)
50 - 140 Hz
0 - 10 dB (50 Hz)
12 V DC car battery (negative ground)
At rated output: 5A
35 Hz - 200 Hz
Approx. 3.6 kg (16 lb. 15 oz.)
Parts for installation and connections
(1 set)
XS-TL1
Digitally Powered Subwoofer
High Efficiency Class D PWM Amplifier
50W x 1Ch at 1 ohm
Adjustable 50-180Hz Lo-Pass Filter
Adjustable 50Hz EQ (0 to +10dB)
Adjustable Output Level & Phase
6
3
/
4
" Aluminum Cone Driver w/Rubber Surround
1 ohm Voicecoil Matched to Digital Amp
Compact Vent-loaded Enclosure only 16" High
Vertical or Horizontal Mount Bracket Supplied
Preamp and High Level (speaker) Inputs
Design and specifications subject to change without notice.
Amplifier Board
Power Amplifier Section
System Section
Harness Plug Configuration
Plug Shown With Wires Facing Viewer
Pin Number Wire Color
Description
1
Black
Ground
2
Blue
Remote Input
3
Black (RCA)
Aux Input Right Neg
4
Black (RCA)
Aux Input Left Neg
5
Black (RCA)
Line Out Right Neg
6
Black (RCA)
Line Output Left Neg
7
Gray/Black
Hi-Level-In Right Neg
8
White/Black
Hi-Level-In Left Neg
9
Black
Ground
10
Yellow
Battery +
11
Red (RCA)
Aux Input Right Pos
12
White (RCA)
Aux Input Left Pos
13
Red (RCA)
Line Out Right Pos
14
White (RCA)
Line Output Left Pos
15
Gray
Hi-Level-In Right Pos
16
White
Hi-Level-In Left Pos
Height: 405 mm (approx 15
15
/
16
in)
Width (Diameter): 200 mm (approx 7
7
/
8
in)
Dimensions