Sony ZS-BTG900 Operating Instructions - Page 2
Other Operations, Precautions, Troubleshooting, Messages, Specifications - manual
View all Sony ZS-BTG900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Other Operations Unit Using the display You can check information about the currently playing audio file from the disc using the display. Information about the total number of tracks and the playing time of an audio CD After the CD is loaded and the reading process is completed, the total number of tracks and the total playing time are displayed. Total number of tracks Total playing time Information about the total number of folders on an MP3/WMA disc After the MP3/WMA disc is loaded and the reading process is completed, the total number of folders is displayed. The total number of files and the total playing time are not displayed. (Example: MP3 disc) Total number of folders To check MP3/WMA file information Press DISPLAY repeatedly while playing a disc. The display changes as follows: Song title ( )*1 Artist name ( )*1 Album name ( )*1 Current file number and playing time*2 *1 If the file does not have corresponding ID3 information, the file name, "NO ARTIST," and "NO ALBUM" scroll. *2 The artist name or album name will change to this in a few seconds. Selecting play mode You can set the unit to play tracks/files repeatedly or in random order on a disc. Press MODE repeatedly while a disc playback is stopped. Each time you press the button, the indication changes as follows: Normal play (None) Single repeat ( 1) All repeat ( ) Selected folder play ( )* Selected folder repeat play ( , )* Shuffle play (SHUF) * These functions are available only for MP3/WMA files on an MP3/WMA disc. To repeat A single track/ MP3/WMA file All tracks/MP3/ WMA files A selected folder on an MP3/WMA disc Do this 1 Press MODE repeatedly until " 1" appears. 2 Press or to select an audio file that you want to repeat. 3 Press to start Repeat Play. 1 Press MODE repeatedly until " " appears. 2 Press to start Repeat Play. 1 Press MODE repeatedly until " " (Folder) and " " appear. 2 Select the folder by pressing or + . 3 Press to start Repeat Play. Note During Shuffle Play mode, you cannot select the previous track/file by pressing , nor select a folder by pressing + or - . Remote * (on the unit and remote) and VOLUME + (on the remote) have a tactile dot. Presetting radio stations You can store radio stations in the unit's memory. You can preset up to 30 radio stations, 20 for FM and 10 for AM. 1 Press FM AUTO PRESET or AM AUTO PRESET to select the band. 2 Hold down FM AUTO PRESET or AM AUTO PRESET until "AUTO" flashes on the display. 3 Press ENTER to store the station. The stations are stored in memory from lower frequencies to higher ones. If a station cannot be preset automatically You need to preset a station with a weak signal manually. 1 Press FM AUTO PRESET or AM AUTO PRESET to select the band. 2 Tune to a station you want. 3 Press MANUAL PRESET . The band selected ("FM-xx" or "AM-xx") appears on the display. 4 Press PRESET or + until the preset number you want for the station flashes on the display. 5 Press ENTER to store the station. If another station is already assigned to the selected preset number, that station is replaced by the new one. Setting the Sleep Timer You can fall asleep while listening to the radio or music from the connected device using the sleep timer. The unit turns off automatically after a preset duration. 1 Play the music source you want. 2 Press SLEEP repeatedly to select the sleep time duration. Each time you press the button, the indication changes as follows: AUTO* 60MIN 30MIN OFF 10MIN 20MIN * For the CD function, the unit turns off automatically when playback finishes or after 90 minutes. When using the BLUETOOTH, radio or AUDIO IN function, the unit turns off after 90 minutes. The sleep time duration is displayed for a few seconds, then the display returns to the previous indication. When the setting becomes effective, the display will dim and the light sync function will turn off. When the preset time has passed, the unit turns off automatically. Note Music playback on a device connected to the AUDIO IN jack does not stop automatically. To stop playback on the connected device, operate the connected device. To cancel the sleep function Press SLEEP repeatedly to select "OFF." Connecting optional components You can enjoy the sound from an optional component, such as a portable digital music player, through the speakers of this unit. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. Tip The preset radio stations remain in the unit's memory even in the following situations. ˋˋThe AC power cord is unplugged. ˋˋThe batteries are removed. Listening to the radio from preset radio stations 1 Press FM AUTO PRESET or AM AUTO PRESET to select the band. 2 Press PRESET or + to select the radio station's stored preset number. To component (e.g., portable digital music player) To AUDIO IN jack Audio connection cable (not supplied) 1 Connect the AUDIO IN jack to the line output jack of the portable digital music player or other component, using an audio connection cable (not supplied). 2 Turn the connected component on. 3 Press AUDIO IN and start playing sound on the connected component. The sound from the connected component is output from the speakers. To connect the unit to a TV or VCR, use an extension cable (not supplied) with a stereomini jack on one end and two phono plugs on the other end. Notes ˎˎIf connected to the monaural output jack of a digital music player, sound may not come through the right speaker of the unit. ˎˎIf connected to the line output jack of a digital music player, distortion may occur. If the sound is distorted, connect to the headphones jack of a digital music player instead. ˎˎIf connected to the headphones jack of a digital music player, increase the volume of the digital music player, and then adjust the volume of the unit. Precautions Discs that this unit CAN play ˎˎAudio CD (CD-DA*1 tracks) ˎˎCD-R/CD-RW that contains MP3/WMA files and is finalized*2 correctly. *1 CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for audio CDs. *2 Finalizing is the process to make the CD-R/CD-RW discs playable on the consumer disc player products, and the finalizing can be enabled or disabled as optional settings during disc creation in most recording software. Discs that this unit CANNOT play ˎˎCD-R/CD-RW other than those recorded in audio CD format or formats conforming to ISO 9660 Level 1/Level 2 or Joliet ˎˎCD-R/CD-RW of poor recording quality, CD-R/ CD-RW with scratches or that is dirty, or CD-R/ CD-RW recorded using an incompatible recording device ˎˎCD-R/CD-RW that is unfinalized or finalized incorrectly Notes on discs ˎˎBefore playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. If there are scratches, dirt or fingerprints on the CD, a tracking error may occur. ˎˎDo not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. ˎˎDo not expose the CD to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. ˎˎDo not stick paper or a sticker on the CD, or scratch the surface of the CD. ˎˎAfter playing, store the CD in its case. Note on DualDiscs ˎˎA DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. Music discs encoded with copyright protection technologies ˎˎThis product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. On safety ˎˎAs the laser beam used in the CD player section is harmful to eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. ˎˎShould any solid object or liquid fall into the unit, unplug the unit, and have it checked by qualified personnel before operating it any further. ˎˎDiscs with non-standard shapes (e.g., heart, square, star) cannot be played on this unit. Attempting to do so may damage the unit. Do not use such discs. On power sources ˎˎFor AC operation, use the supplied AC power cord; do not use any other cord. ˎˎUnplug the unit from the wall outlet if it is not to be used for an extended period of time. ˎˎWhen not using the batteries, remove them to avoid damage that can be caused by battery leakage or corrosion. On placement ˎˎDo not leave the unit in a location near heat sources, in a place subject to direct sunlight, excessive dust or mechanical shock, or in a car subject to the direct rays of the sun. ˎˎDo not place the unit on an inclined or unstable surface. ˎˎDo not place anything within 10 mm (13/32 in) of the rear of the cabinet. The ventilation openings must be unobstructed for the unit to operate properly and prolong the life of its components. ˎˎSince a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring-wound watches away from the unit to prevent possible damage from the magnet. On operation ˎˎCondensation may form on outer surfaces or internally, and cause the unit to malfunction if the unit is suddenly moved from a cold to a warm environment. If condensation forms, turn off the unit, and leave the unit off until the moisture evaporates. Do not use the unit until the condensation has fully evaporated. On cleaning the cabinet ˎˎClean the cabinet, panel and controls using a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. On BLUETOOTH communication ˎˎBLUETOOTH wireless technology operates within a range of about 10 meters (30 ft). The maximum communication range may vary depending on obstacles (human body, metal, wall, etc.) or the electromagnetic environment. The unit Steel cabinet Optimal performance Limited performance ˎˎThe following conditions may affect the sensitivity of BLUETOOTH communication. ˋˋThere is an obstacle such as a person, metal, or wall between this unit and the BLUETOOTH device used. ˋˋDevices or equipment such as wireless LAN devices, microwave oven, cordless telephone, etc., using a 2.4 GHz frequency band, are in use near the unit. ˋˋThe unit is placed on a shelf made of steel. ˎˎBecause both the BLUETOOTH and the wireless LAN (IEEE802.11b/g/n) devices use the same frequency band (2.4 GHz), microwave interference may occur, resulting in communication speed deterioration, noise, or invalid connection if this unit is used near wireless LAN devices. In such cases, do the following. ˋˋIf this unit is used within 10 m (30 ft) of other wireless LAN devices, turn off the wireless LAN devices if possible, or place this unit at least 10 m (30 ft) away from the wireless LAN devices. ˋˋUse the BLUETOOTH device as close to the unit as possible. ˎˎMicrowaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off the power on this unit and the BLUETOOTH device in the following locations, as they may cause an accident. ˋˋWhere inflammable gas is present, in a hospital, train, airplane, or a petrol station ˋˋNear automatic doors or a fire alarm ˎˎThis unit supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when BLUETOOTH wireless technology is used, but security may be insufficient, depending on the setting. Be careful when communicating using BLUETOOTH wireless technology. ˎˎSony cannot accept any responsibility for leakage of information when using the BLUETOOTH function of this unit. ˎˎConnection with all BLUETOOTH devices cannot be guaranteed. ˋˋBLUETOOTH devices used with this unit must conform to the BLUETOOTH standard specified by Bluetooth SIG, Inc., and must be certified to comply. ˋˋEven when the connected BLUETOOTH device conforms to the above mentioned BLUETOOTH standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. ˎˎDepending on the device to be connected, it may require some time to start communication. If you have any questions or problems concerning your unit, consult your nearest Sony dealer. Troubleshooting General "LIGHT SYNC DEMO MODE" appears on the display. ˎˎWith the unit turned on, set the automatic demonstration off by pressing MODE until "DEMO MODE OFF" appears on the display. The unit does not turn on when the AC power cord is connected. ˎˎMake sure the AC power cord is connected to the wall outlet securely. The unit does not turn on during battery operation. ˎˎMake sure the batteries are inserted correctly. There is no sound. ˎˎMake sure the appropriate function is selected for the music or sound source you want to listen to. The sound is noisy. ˎˎIs someone using a mobile phone or other equipment emitting radio waves near the unit? If so, move the unit and the BLUETOOTH device away from such devices. Devices such as mobile phones, etc., can affect BLUETOOTH communication. CD/MP3/WMA player The CD player does not play or "NO DISC" is displayed even when a CD is in place. ˎˎPlace the CD with the label side up. ˎˎClean the CD. ˎˎTake out the CD and leave the CD compartment open for about an hour to dry any condensation. ˎˎThe CD-R/CD-RW may be blank or unfinalized. ˎˎThere are no playable MP3/WMA files on the disc. ˎˎThere is a problem with the quality of the CD-R/CD-RW, recording device or application software. ˎˎReplace all the batteries with new ones if they are exhausted. The sound drops out (stops briefly). ˎˎReduce the volume. ˎˎClean the CD, or replace it if the CD is badly damaged. ˎˎPlace the unit in a location free from vibrations. ˎˎClean the audio laser lens with a commercially available blower. ˎˎThe sound may drop out or noise may be heard when using a poor quality CD-R/CD-RW or if there is a problem with the recording device or application software. Starting playback takes more time than usual. ˎˎThe following discs take a longer time to start playback. ˋˋA disc recorded with a complicated tree structure. ˋˋA disc that has many folders or non-MP3/ WMA files. BLUETOOTH device There is no sound. ˎˎMake sure that this unit is not too far from the BLUETOOTH device (or smartphone), or that this unit is not receiving interference from a wireless LAN, another 2.4 GHz wireless device, or a microwave oven. ˎˎCheck that the BLUETOOTH connection was completed properly between this unit and the BLUETOOTH device (or smartphone). ˎˎPerform pairing again (see "To pair with a BLUETOOTH device"). ˎˎKeep away from metal objects or surfaces. ˎˎMake sure that the BLUETOOTH function is activated on the BLUETOOTH device (or smartphone). The sound skips or the correspondence distance is short. ˎˎIf other equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device(s), or a microwave oven is nearby, move the device and the unit away from such equipment if possible. ˎˎRemove any obstacle between this unit and the device or move the device and the unit away from the obstacle. ˎˎLocate this unit and the device as close to each other as possible. ˎˎRe-position this unit. ˎˎRe-position the BLUETOOTH device or smartphone. A connection cannot be established. ˎˎPerform pairing again (see "To pair with a BLUETOOTH device"). ˎˎCheck that the BLUETOOTH device is compatible with this unit. For the latest information on compatible BLUETOOTH devices, check the information on the website listed is under "Compatible BLUETOOTH devices." Pairing fails. ˎˎBring the BLUETOOTH device closer to the unit. ˎˎDelete the model name of this unit from the BLUETOOTH device and perform pairing again (see "To pair with a BLUETOOTH device"). ˎˎCheck that the BLUETOOTH device is compatible with this unit. For the latest information on compatible BLUETOOTH devices, check the information on the website listed is under "Compatible BLUETOOTH devices." One-touch connection (NFC) is not possible. ˎˎCheck that the smartphone is compatible with this unit (see "Compatible smartphones"). ˎˎCheck that the "NFC Easy Connect" app is displayed on the smartphone. ˎˎCheck that the NFC function of the smartphone is set to on. ˎˎTurn on the unit and touch the smartphone on the N-marked part again. ˎˎKeep the smartphone close to the unit until the smartphone responds. If you fail, move the smartphone slightly on the N-marked part of the unit. ˎˎIf the smartphone is in a case, remove it. ˎˎNFC receiving sensitivity depends on the device. If you fail to connect with a smartphone by One touch several times, connect to the unit by on-screen operation. Radio The sound is weak or reception is poor quality. ˎˎReplace all the batteries with new ones. ˎˎMove the unit away from any nearby TV. ˎˎFor FM reception, extend the antenna to its full length, and reorient it for best FM reception. For AM reception, reorient the unit itself to find the best reception. The TV picture is unstable. ˎˎIf you are listening to an FM program near a TV with an indoor antenna, move the unit away from the TV. Remote The remote does not function. ˎˎReplace both batteries in the remote with new ones. ˎˎMake sure that you are pointing the remote at the remote sensor on the unit. ˎˎRemove any obstacles in the path of the remote and the unit. ˎˎMake sure the remote sensor is not exposed to strong light such as direct sunlight or fluorescent lamp light. ˎˎMove closer to the unit when using the remote. After trying the suggested remedies, if the problem persists, unplug the AC power cord or remove all the batteries. After all the indications on the display disappear, plug in the AC power cord again, or re-insert the batteries. If the problem persists, consult your nearest Sony dealer. Messages NO BT:BLUETOOTH connection is not established. NO DISC:There is no disc in the CD compartment. NO TRACK:No playable tracks/files are on the disc. NOT SUPPORT:An unsupported disc is in the CD compartment. CANNOT PLAY:An unplayable disc is in the CD compartment. (Example: broken disc) Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 4.6-ohm loads, both channels driven from 200 Hz - 10,000 Hz; rated 3.5 W per channel-minimum RMS power, with no more than 10 % total harmonic distortion in AC operation. Woofer with 4.6-ohm loads, driven from 50 Hz - 200 Hz; rated 12 W minimum RMS power, with no more than 10 % total harmonic distortion in AC operation. CD player section System Compact disc digital audio system Laser diode properties Emission duration: Continuous Laser output: Less than 44.6 μW (This output is the value measurement at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.) Number of channels 2 Frequency response 20 Hz - 20,000 Hz +1/-2 dB Wow and flutter Below measurable limit BLUETOOTH section Communication System BLUETOOTH Specification Version 3.0 Modulation method FHSS Output BLUETOOTH Specification Power Class 2 Maximum communication range Line of sight approx. 10 m (30 ft)*1 Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Supported BLUETOOTH Profiles*2 A2DP (Advanced Audio Distribution Profile) AVRCP*3 (Audio/Video Remote Control Profile) Supported codec*4 SBC (Subband Codec) *1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial performance, operating system, application software, etc. *2 BLUETOOTH standard profiles provide the specifications for BLUETOOTH communication between devices. *3 Some operations may not be available depending on the device. *4 Codec: Audio signal compression and conversion format Radio section Frequency range FM: 87.5 MHz - 108 MHz AM: 530 kHz - 1,710 kHz Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna Input AUDIO IN Stereo mini jack General Speaker Full range: 10 cm (4 in) dia., 4.6 Ω, cone type (2) Woofer: 13 cm (5 1/8 in) dia., 4.6 Ω, cone type (1) Tweeter: 3.5 cm (1 7/16 in) dia. (2) Power output 4 W + 4 W (at 4.6 Ω, 10% harmonic distortion) Woofer: 12 W (at 4.6 Ω, 10% harmonic distortion) Power requirements For unit: 120 V AC, 60 Hz (AC power supply) 12 V DC (8 R20 (size D) batteries) For remote control: 3 V DC, 2 R6 (size AA) batteries Power consumption AC 12 W Battery Life*1, *2 CD playback Approx. 20 hours BLUETOOTH device playback Approx. 22 hours FM reception Approx. 26 hours *1 Measured by Sony standards. The actual battery life may vary depending on the circumstances of the unit or operating conditions. *2 When using Sony alkaline batteries Dimensions Approx. 600 mm × 210 mm × 355.5 mm (23 5/8 in × 8 3/8 in × 14 in) (W/H/D) (incl. projecting parts) Mass Approx. 8.0 kg (17 lb 10 oz) (incl. batteries) Supplied accessories AC power cord (1) Remote control (1) Design and specifications are subject to change without notice.