Sony ZS-D50 Operating Instructions (primary manual) - Page 19

The Radio Presetting radio stations AUTO PRESET RADIO BAND You can store radio stations into the player's memory. You can preset up to 20 radio stations, 10 for each band in any order. ENTER MEMORY CHECK The Radio On the player 1 Press RADIO BAND to tune in the band you want. 2 Hold down ENTER• MEMORY CHECK for about 2 seconds. 3 Press PRESET + or - to display the preset number you want. 4 Press ENTER• MEMORY CHECK. 5 Press TUNING TIME SET + or - to tune in a station you want. 6 Press ENTER• MEMORY CHECK. 1 Press RADIO BAND until the band you want appears in the display. 2 Hold down AUTO PRESET until "AUTO" appears in the display. The stations are stored in memory from the lower frequencies as long as the station has a signal strong enough. If a station cannot be preset automatically You need to preset a station with a weak signal manually. Also, when you want to replace a preset station with a new one, proceed as follows: On the remote: 1 Press BAND until the band you want appears in the display. 2 Press TUNE + or - until you tune in a station you want. 3 Hold down the number buttons that you want to preset the new station on for about 2 seconds. The new station replaces the old one. TheRadio 19