Sony ZS-YN7 Operating Instructions - Page 27

Troubleshooting, General, CD Player

Page 27 highlights

About CD-Rs/CD-RWs This CD player can play CD-Rs/CD-RWs recorded in the ATRAC3plus/ATRAC3, MP3 or CDDA* format, but playback capability may vary depending on the quality of the disc and the condition of the recording device. * CDDA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for the Audio CDs. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. Troubleshooting General The power is not on. • Connect the AC power cord to a wall outlet securely. • Make sure the batteries are inserted correctly. • Replace all the batteries with new ones if they are weak. • You cannot turn on the player with the remote when you operate the player on batteries. There is no audio. • Adjust the volume. • Unplug the headphones when listening through speakers. Noise is heard. • Someone is using a portable telephone or other equipment that emits radio waves near the player. t Move the portable telephone, etc., away from the player. CD Player "No disc" lights in the display even when a CD is in place. • Place the CD with the label surface up. • The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW with the recording device. • There is a problem with the quality of the CD-R/CD-RW, recording device, or application software. • The CD-R/CD-RW is blank. • Replace all the batteries with new ones if they are weak. The CD does not play. • Place the CD with the label surface up. • Clean the CD. • Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. continued 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

27
Troubleshooting
General
The power is not on.
Connect the AC power cord to a wall outlet
securely.
Make sure the batteries are inserted correctly.
Replace all the batteries with new ones if
they are weak.
You cannot turn on the player with the
remote when you operate the player on
batteries.
There is no audio.
Adjust the volume.
Unplug the headphones when listening
through speakers.
Noise is heard.
Someone is using a portable telephone or
other equipment that emits radio waves near
the player.
t
Move the portable telephone,
etc., away from the player.
CD Player
“No disc” lights in the display even when
a CD is in place.
Place the CD with the label surface up.
The CD-R/CD-RW was not finalized.
Finalize the CD-R/CD-RW with the
recording device.
There is a problem with the quality of the
CD-R/CD-RW, recording device, or
application software.
The CD-R/CD-RW is blank.
Replace all the batteries with new ones if
they are weak.
The CD does not play.
Place the CD with the label surface up.
Clean the CD.
Take out the CD and leave the CD
compartment open for about an hour to dry
moisture condensation.
About CD-Rs/CD-RWs
This CD player can play CD-Rs/CD-RWs
recorded in the ATRAC3plus/ATRAC3,
MP3 or CDDA* format, but playback
capability may vary depending on the quality
of the disc and the condition of the recording
device.
* CDDA is the abbreviation for Compact Disc
Digital Audio. It is a recording standard used for
the Audio CDs.
If you have any questions or problems
concerning your player, please consult your
nearest Sony dealer.
continued