Sony ZS-YN7PS Operating Instructions - Page 27
Troubleshooting, General, CD Player
View all Sony ZS-YN7PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
About CD-Rs/CD-RWs This CD player can play CD-Rs/CD-RWs recorded in the ATRAC3plus/ATRAC3, MP3 or CDDA* format, but playback capability may vary depending on the quality of the disc and the condition of the recording device. * CDDA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for the Audio CDs. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. Troubleshooting General The power is not on. • Connect the AC power cord to a wall outlet securely. • Make sure the batteries are inserted correctly. • Replace all the batteries with new ones if they are weak. • You cannot turn on the player with the remote when you operate the player on batteries. There is no audio. • Adjust the volume. • Unplug the headphones when listening through speakers. Noise is heard. • Someone is using a portable telephone or other equipment that emits radio waves near the player. t Move the portable telephone, etc., away from the player. CD Player "No disc" lights in the display even when a CD is in place. • Place the CD with the label surface up. • The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW with the recording device. • There is a problem with the quality of the CD-R/CD-RW, recording device, or application software. • The CD-R/CD-RW is blank. • Replace all the batteries with new ones if they are weak. The CD does not play. • Place the CD with the label surface up. • Clean the CD. • Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. continued 27