Sony ZV-1F Help Guide - Page 21
Notes on the image sensor
View all Sony ZV-1F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Do not directly expose the viewfinder to beams such as laser beams. These may damage the inside of the viewfinder and cause the camera to malfunction. Notes on the monitor Do not press against the monitor. The monitor may be discolored and that may cause a malfunction. If the monitor has drops of water or other liquids on it, wipe it with a soft cloth. If the monitor stays wet, the surface of the monitor may change or deteriorate. This may cause a malfunction. If you use the camera in a cold location, the image may have a trailing appearance. This is not a malfunction. When you connect cables to the terminals on the camera, the rotating range of the monitor may become limited. Notes on the image sensor If you point the camera at an extremely strong light source while shooting images with a low ISO sensitivity, highlighted areas in the images may be recorded as black areas. Notes on the wind screen If the wind screen is stored for a long time in a place exposed to direct sunlight or near a heating device, it may become discolored. The texture and degree of raising of the hairs may change depending on the environment during use and storage as well as aging. Brushing or forcefully pulling the hairs on the wind screen may cause them to come off. If the wind screen gets wet or dirty, do not remove it from the wind screen adaptor. Wipe it off with a soft, dry cloth and dry it in the shade. On image data compatibility This product conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and Information Technology Industries Association). Services and software provided by other companies Network services, content, and the [operating system and] software of this Product may be subject to individual terms and conditions and changed, interrupted or discontinued at any time and may require fees, registration and credit card information. Notes on connecting to the internet To connect the camera to a network, connect it through a router or a LAN port with the same function. Failure to connect in this manner may result in security issues. Notes on security SONY WILL NOT BE HELD LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION DEVICES, UNAVOIDABLE DATA LEAKS CAUSED BY TRANSMISSION SPECIFICATIONS, OR OTHER SECURITY PROBLEMS. Depending on the usage environment, unauthorized third parties on the network may be able to access the product. When connecting the camera to a network, be sure to confirm that the network is protected securely. The content of communications may be unknowingly intercepted by unauthorized third parties in the vicinity of the signals. When using wireless LAN communication, implement proper security measures to protect the content of communications. Optional accessories It is recommended that you use genuine Sony accessories. Some Sony accessories are only available in certain countries and regions. 21