Stihl 71 Instruction Manual - Page 14

Filling the Container, Spraying

Page 14 highlights

English Filling the Container Spraying Before filling the tank with chemicals, carry out a test with fresh water and check all parts of the sprayer for leaks. max N Stand the sprayer on a level surface. N Remove the cap from the tank. 8014BA013 AS max N Fill up with thoroughly mixed plant protection solution - do not overfill (no further than max. mark - arrow). 8014BA011 AS N Carry the unit on your back with both harness straps - do not hang it over one shoulder. N Operate the pump lever slowly and steadily with the gun closed - several strokes are required to build up pressure. N Operate the gun and always pay attention to the optimal working pressure while spraying. N If the working pressure drops, restore it by operating the pump handle. 8014BA021 AS N Fit the cap and tighten it down firmly 1 with both hands. 8014BA012 AS 2 N Check the O-ring (1) in the cap (2). It must be in good condition. 12 SG 51, SG 71

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

SG 51, SG 71
English
12
Before filling the tank with chemicals,
carry out a test with fresh water and
check all parts of the sprayer for leaks.
N
Stand the sprayer on a level
surface.
N
Remove the cap from the tank.
N
Check the O-ring (1) in the cap (2).
It must be in good condition.
N
Fill up with thoroughly mixed plant
protection solution – do not overfill
(no further than max. mark – arrow).
N
Fit the cap and tighten it down firmly
with both hands.
N
Carry the unit on your back with
both harness straps – do not hang it
over one shoulder.
N
Operate the pump lever slowly and
steadily with the gun closed –
several strokes are required to build
up pressure.
N
Operate the gun and always pay
attention to the optimal working
pressure while spraying.
N
If the working pressure drops,
restore it by operating the pump
handle.
Filling the Container
max
8014BA013 AS
8014BA012 AS
1
2
max
8014BA011 AS
8014BA021 AS
Spraying