Stihl BR 350 Product Instruction Manual - Page 15
Adjusting the Throttle, Cable, Fitting the Harness - blower turn into br 430
View all Stihl BR 350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
N Secure the velcro strip to the blower tube - pull the flap through the buckle. Adjusting the Throttle Cable It may be necessary to correct the adjustment of the throttle cable after assembling the machine or after a prolonged period of operation. Adjust the throttle cable only when the unit is completely and properly assembled. English Fitting the Harness Adjusting the Harness 373BA003 KN N Secure the blower tube to the handle on the backplate. N Set throttle trigger to the full throttle position - as far as stop. N Carefully rotate the screw in the throttle trigger in the direction of the arrow until you feel initial resistance. Then rotate it another full turn. 0009BA008 KN N Pull the ends of the straps downwards to tighten the harness. Loosening the Harness 373BA004 KN N Lift the tabs of the sliding adjusters. N Adjust the harness so that the backplate fits snugly and securely against your back. BR 350, BR 430 13