Stihl BR 400 Instruction Manual - Page 29

:DUUDQW\±3HULRG

The warranty periods will begin on the

date the utility equipment engine is

purchased by the initial purchaser and

you have signed and sent back the

warranty card to STIHL. If any emission

related part on your engine is defective,

the part will be replaced by STIHL

Incorporated at no cost to the owner.

Any warranted part which is not

scheduled for replacement as required

maintenance, or which is scheduled only

for regular inspection to the effect of

"repair or replace as necessary" will be

warranted for the warranty period.

Any warranted part which is scheduled

for replacement as required mainten-

ance will be warranted for the period of

time up to the first scheduled replace-

ment point for that part.

'LDJQRVLV

You, as the owner, shall not be charged

for diagnostic labor which leads to the

determination that a warranted part is

defective. However, if you claim warranty

for a component and the machine is

tested as non-defective, STIHL

Incorporated will charge you for the cost

of the emission test.

Mechanical diagnostic work will be

performed at an authorized STIHL

servicing dealer. Emission test may be

performed either at STIHL Incorporated

or at any independent test laboratory.

:DUUDQW\±:RUN

STIHL Incorporated shall remedy

war-ranty defects at any authorized

STIHL servicing dealer or warranty

station. Any such work shall be free of

charge to the owner if it is determined

that a warranted part is defective. Any

manufacturer-approved or equivalent

replacement part may be used for any

warranty mainten-ance or repairs on

emission-related parts and must be

provided without charge to the owner.

STIHL Incorporated is liable for damages

to other engine components caused by

the failure of a warranted part still under

warranty.

The California Air Resources Board’s

Emission Warranty Parts List specifically

defines the emission-related warranted

parts. These warranted parts are:

Carburetor

Choke (Cold start enrichment system)

Intake manifold

Air filter

Spark plug

Magneto or electronic ignition system

(ignition module)

Catalytic converter (if applicable)

Fasteners

:KHUH±WR±PDNH±D±FODLP±IRU±:DUUDQW\

6HUYLFH±

Bring the product to any authorized

STIHL servicing dealer and present the

signed warranty card.

0DLQWHQDQFH±5HTXLUHPHQWV

The maintenance instructions in this

manual are based on the application of

the recommended 2-stroke fuel-oil

mixture (see also instruction "Fuel").

Deviations from this recommendation

regarding quality and mixing ratio of fuel

and oil may require shorter maintenance

intervals.

/LPLWDWLRQV

This Emission Control Systems

Warranty shall not cover any of the

following:

-

repair or replacement required

because of misuse, neglect or lack of

required maintenance,

-

repairs improperly performed or

replacements not conforming to

STIHL Incorporated specifications that

adversely affect performance and/or

durability, and alterations or

modifications not recommended or

approved in writing by STIHL

Incorporated,

and

-

replacement of parts and other

services and adjustments necessary

for required maintenance at and after

the first scheduled replacement point.

µ»

%5±¶µ½¾±·½½

Stihl BR 400 Instruction Manual - Page 29

Emission Warranty Parts List specifically

Page 29 highlights