Stihl FS 110 R Product Instruction Manual - Page 32

English Fueling Preparations Threaded filler cap Opening the toolless filler cap 002BA419 KN Refueling Take care not to spill fuel while fueling, and do not overfill the tank. STIHL recommends use of the STIHL filling system (special accessory). Closing the toolless filler cap 249BA055 KN 002BA420 KN 249BA053 KN N Before fueling, clean the filler cap and the area around it so that dirt cannot fall into the tank. N Always position the machine so that the filler cap is facing upwards. One of two different filler caps is installed as standard at the factory. N Swing the grip into an upright position. N Position the cap with the grip in an upright position; the raised positioning marks must line up. N Turn cap clockwise as far as it will go (approx. 1/4 turn). 249BA056 KN 249BA054 KN 002BA418 KN Toolless filler cap (with folding grip) N Turn the cap counterclockwise (approx. 1/4 turn). N Remove the filler cap. N Fold the grip down so that it is flush with the surface. If the grip is not flush with the surface and the lug on the clip does not engage entirely in the recess (arrow), the cap is not properly closed and the steps 30 FS 110, FS 110 R