Stihl FS 70 R Product Instruction Manual - Page 19

Mounting the barrier bar Adjusting and securing the loop handle A English Mounting the Deflector Use the right deflector 1 547BA007 KN 002BA262 KN 0.2 in (5,3 mm) 1 2 3 N Fit the washer (1) on the M5x23 screw (2). N Hold the barrier bar (3) against the loop handle and insert the screw with washer. N Tighten down the screw (2) firmly. Leave the barrier bar permanently mounted to the loop handle. 547BA031 KN The loop handle can be adjusted to suit the height and reach of the operator and the application by changing distance (A). Recommended distance (A): about 14 in (35 cm) N Loosen the screw on the handle. N Slide the handle to the required position. N Tighten down the screw so that the handle cannot be rotated on the drive tube. Deflector (1) is approved for mowing heads only and must therefore be mounted before fitting a mowing head 2 Deflector (2) is approved for grass cutting blades only and must therefore be mounted before fitting a grass cutting blade. Mounting the Deflector Deflectors (1) and (2) are both mounted to the gearbox in the same way. 002BA263 KN FS 70 RC 17