Stihl FS 91 Instruction Manual - Page 21
Approved Power Tool, Attachments, Mounting the Bike Handle
View all Stihl FS 91 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Approved Power Tool Attachments The following STIHL attachments may be mounted to the basic power tool: Interchangeable attachment BF FCS 1) 2) FH 145° HL 0° 1) HL 145° 1) HT 1) KB (4601) 1) KW (4601) 1) Application Cultivator with pick tines Edger Power scythe Long reach hedge trimmer Long reach hedge trimmer Pole pruners Bristle brush PowerSweep 1) not approved for bike-handled machines 2) shoulder strap not necessary Mounting the Bike Handle Mounting Bike Handle with Swiveling Handle Support The machine is supplied with the swiveling handle support already mounted on the shaft. To mount the handlebar it is necessary to remove the clamp moldings. Removing the clamp moldings English N Pull out the wing screw - the washer (6) remains on the wing screw. N Separate the clamp moldings - the springs (4 and 5) remain in the lower clamp. Securing the handlebar A 7 250BA046 KN 1 N Place the handlebar (7) in the lower clamp (1) so that distance A is no more than 15 cm (6 in). N Place the upper clamp in position and hold both clamp moldings together. N Push the wing screw through the two clamps as far as stop - hold all parts together and secure them. N Hold the lower clamp (1) and upper clamp (2) firmly together. N Release the wing screw (3) - the clamps are loose once the wing screw has been released. They are pushed apart by the two springs (4 and 5). FS 91, FS 91 R 19