Stihl FS-KM Instruction Manual - Page 18
Mounting the KombiTool, Mounting the Deflector
View all Stihl FS-KM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English Mounting the KombiTool 2 1 Mounting the Deflector Mounting the Deflector 1 002BA326 KN N Push the lug (1) on the drive tube into the slot (2) in the coupling sleeve as far as stop. 3 3 2 Fitting the Skirt and Blade WARNING Risk of injury from thrown objects and contact with the cutting attachment. These parts must be fitted to the deflector (1) when you use a mowing head. Fitting the Skirt 002BA637 KN 4 When correctly installed, the red line (3) (arrow point) must be flush with the end of the coupling sleeve. N Tighten down the star knob (4) firmly. Removing the KombiTool N Reverse the above sequence to remove the drive tube. 002BA327 KN 3 1 Deflector for mowing attachments 2 Deflector for mowing heads Deflectors (1 and 2) are both mounted to the gearbox in the same way. N Place the deflector on the gearbox flange. N Insert the screws (3) and tighten them down firmly. 002BA636 KN N Slide the lower guide slot of the skirt onto the deflector - it must snap into position. Removing the Skirt 2. 1. 002BA646 KN N Insert the stop pin into the hole in the skirt and use it to push the skirt to the left. N Pull the skirt off the deflector. 16 FS-KM