Stihl HT 103 Product Instruction Manual - Page 31

Place the filing gauge on the chain

Get Stihl HT 103 PDF manuals and user guides View all Stihl HT 103 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Lowering depth gauges The depth gauge setting is reduced when the chain is sharpened. N Use a filing gauge to check the setting every time you sharpen the chain. English WARNING The other parts of the humped drive link must not be filed since this may increase the kickback tendency of the power tool. WARNING The kickback tendency of the machine is increased if the depth gauges are too low. 689BA052 KN 689BA051 KN 1 2 689BA061 KN N File down the depth gauge until it is N level with the filing gauge. N Place a filing gauge (1) that matches the chain pitch on the N chain and press it against the cutter - if the depth gauge projects from the filing gauge, the depth gauge has to be lowered. N 689BA044 KN Saw chains with humped drive link (2) - upper part of humped drive link (2) (with service mark) is lowered along with the depth gauge. N File the top of the depth gauge parallel to the stamped service marking (see arrow) - but do not lower the highest point of the depth gauge in this process. Sharpening Tools (special accessories) Chain pitch Round file ^ Round file File holder Filing gauge inch (mm) mm (inch) Part No. Part No. Part No. 1/4 P (6,35) 3,2 (1/8) 5605 771 3206 5605 750 4300 0000 893 4005 1/4 (6,35) 4,0 (5/32) 5605 772 4006 5605 750 4327 1110 893 4000 3/8 P (9,32) 4,0 (5/32) 5605 772 4006 5605 750 4327 1110 893 4000 0.325 (8,25) 4,8 (3/16) 5605 772 4806 5605 750 4328 1110 893 4000 3/8 (9,32) 5,2 (13/64) 5605 772 5206 5605 750 4329 1110 893 4000 1) consisting of file holder with round file, flat file and filing gauge Place the filing gauge on the chain - the highest point of the depth gauge must be level with the filing gauge. After sharpening, clean the chain thoroughly, remove filings or grinding dust - lubricate the chain thoroughly. Before a long out-of-service period, clean the chain and store it in a welloiled condition. Flat file Part No. 0814 252 3356 0814 252 3356 0814 252 3356 0814 252 3356 0814 252 3356 Sharpening kit 1) Part No. 5605 007 1000 5605 007 1027 5605 007 1027 5605 007 1028 5605 007 1029 HT 102, HT 103, HT 132, HT 133 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
HT 102, HT 103, HT 132, HT 133
English
29
Lowering depth gauges
The depth gauge setting is reduced
when the chain is sharpened.
N
Use a filing gauge to check the
setting every time you sharpen the
chain.
N
Place a filing gauge (1) that
matches the chain pitch on the
chain and press it against the cutter
– if the depth gauge projects from
the filing gauge, the depth gauge
has to be lowered.
Saw chains with humped drive link (2) –
upper part of humped drive link (2) (with
service mark) is lowered along with the
depth gauge.
WARNING
The other parts of the humped drive link
must not be filed since this may increase
the kickback tendency of the power tool.
N
File down the depth gauge until it is
level with the filing gauge.
N
File the top of the depth gauge
parallel to the stamped service
marking (see arrow) – but do not
lower the highest point of the depth
gauge in this process.
WARNING
The kickback tendency of the machine is
increased if the depth gauges are too
low.
N
Place the filing gauge on the chain –
the highest point of the depth gauge
must be level with the filing gauge.
N
After sharpening, clean the chain
thoroughly, remove filings or
grinding dust – lubricate the chain
thoroughly.
N
Before a long out-of-service period,
clean the chain and store it in a well-
oiled condition.
2
689BA061 KN
1
689BA051 KN
689BA044 KN
689BA052 KN
Sharpening Tools (special accessories)
Chain pitch
Round file
^
Round file
File holder
Filing gauge
Flat file
Sharpening kit
1)
inch
(mm)
mm
(inch)
Part No.
Part No.
Part No.
Part No.
Part No.
1/4 P
(6,35)
3,2
(1/8)
5605 771 3206
5605 750 4300
0000 893 4005
0814 252 3356
5605 007 1000
1/4
(6,35)
4,0
(5/32)
5605 772 4006
5605 750 4327
1110 893 4000
0814 252 3356
5605 007 1027
3/8 P
(9,32)
4,0
(5/32)
5605 772 4006
5605 750 4327
1110 893 4000
0814 252 3356
5605 007 1027
0.325
(8,25)
4,8
(3/16)
5605 772 4806
5605 750 4328
1110 893 4000
0814 252 3356
5605 007 1028
3/8
(9,32)
5,2
(13/64)
5605 772 5206
5605 750 4329
1110 893 4000
0814 252 3356
5605 007 1029
1)
consisting of file holder with round file, flat file and filing gauge