Stihl MM 55 STIHL YARD BOSS Product Instruction Manual - Page 9

Check the instruction manual for the MultiTool to ensure you are using the appropriate deflector for that MultiTool. Starting Start the engine at least 10 feet (3 m) from the fueling spot, outdoors only. For specific starting instructions, see the appropriate section of your MultiEngine and MultiTool manuals. Place the power tool on firm ground or other solid surface in an open area. Maintain good balance and secure footing. Warning! Always stand to one side of the unit to avoid the risk of injury from contact with the rotating working tool. 469BA027 KN Warning! To reduce the risk of injury from loss of control, be absolutely sure that the working tool is clear of you and all other obstructions and objects, including the ground, because when the engine starts at starting-throttle, engine speed will be fast enough for the clutch to engage and move the working tool. Once the engine has started, immediately blip the throttle trigger, which should release the starting throttle and allow the engine to slow down to idle. Warning! Your power tool is a one-person machine. Do not allow other persons in the general work area, even when starting. Stop the engine and working tool immediately if you are approached. 5m (16ft) To reduce the risk of eye and other injury always wear proper eye protection (see section on "Proper Clothing") and ensure that bystanders are at least 16 feet (5 m) away. To reduce the risk of damage to property, also maintain this distance from such objects as vehicles English or windows. Any coworkers who must be in the restricted area should also wear goggles or protective glasses. Warning! To reduce the risk of injury from loss of control, do not attempt to "drop start" your power tool. Warning! When you pull the starter grip, do not wrap the starter rope around your hand. Do not let the grip snap back, but guide the starter rope to rewind it properly. Failure to follow this procedure may result in injury to your hand or fingers and may damage the starter mechanism. See also the safety precautions on Starting in the instruction manual of the MultiTool. Important Adjustments Warning! To reduce the risk of personal injury from loss of control or contact with the running working tool, do not use a power tool with incorrect idle adjustment. At correct idle speed, the working tool should not move. For directions on how to adjust idle speed, see the appropriate section of your instruction manual. If you cannot set the correct idle speed, have your STIHL dealer check your power tool and make proper adjustments and repairs. MM 55, MM 55 C 7