Stihl MS 151 T C-E Instruction Manual - Page 8

English THE CHAIN SAW THE USE OF THE CHAIN SAW For illustrations and definitions of the chain saw parts see the chapter on "Main Parts." WARNING Never modify this chain saw in any way. Only attachments supplied by STIHL or expressly approved by STIHL for use with the specific STIHL model are authorized. Although certain unauthorized attachments are useable with STIHL chain saws, their use may, in fact, be extremely dangerous. Transporting the Chain Saw WARNING Always stop the engine before putting the chain saw down. Carrying a chain saw with the engine running may be extremely dangerous. Accidental acceleration of the engine can cause the saw chain to rotate. Always engage the chain brake when taking more than a few steps. WARNING Never operate your chain saw if it is damaged, improperly adjusted or maintained, or not completely and securely assembled. If this chain saw is subjected to unusually high loads for which it was not designed (e.g. heavy impact or a fall), always check that it is in good condition before continuing work. Check in particular that the fuel system is tight (no leaks) and that the controls and safety devices are working properly. Do not continue operating this chain saw if it is damaged. In case of doubt, have it checked by your STIHL servicing dealer. By hand: When transporting your chain saw by hand, the engine must be shut off and the chain saw must be in the proper position, i.e., grip the top handle and place the muffler away from the body; the chain guard (scabbard) should be over the saw chain and guide bar, which should point backwards, away from the direction in which you are walking. By vehicle: When transporting in a vehicle, keep saw chain and bar covered with the chain guard (scabbard). Properly secure your chain saw to prevent turnover, fuel spillage and damage to the chain saw. 0000-GXX-B920-A0 Fuel Your STIHL chain saw uses an oilgasoline mixture for fuel (see the "Fuel" chapter in this instruction manual). WARNING Gasoline is an extremely flammable fuel. If spilled and ignited by a spark or other ignition source, it can cause fire and serious burn injury or property damage. Use extreme caution when handling gasoline or fuel mix. Do not smoke or bring any fire or flame near the fuel or the chain saw. Note that combustible fuel vapor may escape from the fuel system. Fueling Instructions WARNING Pick a Safe Location To reduce the risk of fire and explosion, fuel your chain saw in a well-ventillated area, outdoors away from flames, pilot lights, heaters, electric motors, and other sources of ignition. Vapors can be ignited by a spark or flame many feet away. Select bare ground for fueling and move at least 10 feet (3 m) from the fueling spot before starting the engine. 6 MS 151 TC