Stihl MS 362 C-M Product Instruction Manual - Page 58
Specifications - ms 362 45 cm
View all Stihl MS 362 C-M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
English Specifications EPA / CEPA The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category A = 300 hours B = 125 hours C = 50 hours Engine STIHL single cylinder two-stroke engine Displacement: 3.6 cu. in. (59 cm3) Bore: 1.85 in. (47 mm) Stroke: 1.34 in. (34 mm) Engine power to 4.6 hp (3.4 kW) at ISO 7293: 9,500 rpm Idle speed: 2,800 rpm Max. permissible engine speed with bar and chain: 14,000 rpm Ignition System Fuel System All position diaphragm carburetor with integral fuel pump Fuel tank capacity: 20.3 fl.oz (0.60 l) Chain Lubrication Fully automatic, speed-controlled oil pump with rotary piston. Additional manual oil flow control Oil tank capacity: 11.0 fl.oz. (0.325 l) Weight dry, without bar and chain MS 362: 13.0 lbs (5.9 kg) MS 362 with wraparound handle: 13.7 lbs (6.2 kg) Cutting Attachment Recommended cutting attachments complying with Section 5.11 of ANSI B 175.1-2000. Observe notes on ANSI B 175.1-2000 and definition of "reduced kickback chain" in chapter on "Safety Precautions". Electronic magneto ignition Spark plug (suppressed): Electrode gap: Bosch WSR 6 F, NGK BPMR 7 A 0.02 in. (0.5 mm) Rollomatic E guide bars Reduced kickback STIHL guide bar (with green label) Bar lengths: 16, 18, 20 in (40, 45, 50 cm) Pitch: 3/8" (9.32 mm) Groove width: 0.050 in. (1.3 mm)/ 0.063 in. (1.6 mm) Sprocket nose: 10-tooth 3/8" chains Reduced kickback STIHL saw chains (with green label) Rapid Micro C3 (33 RMC3) Rapid Micro C3 (36 RMC3) Rapid Super C3 (33 RSC3) Rapid Super C3 (36 RSC3) Pitch: 3/8" (9.32 mm) Drive link gauge: 0.050 in. (1.3 mm)/ 0.063 in. (1.6 mm) Chain sprocket 7-tooth for 3/8" (rim sprocket) To ensure compliance with the kickback properties required in Section 5.11 of ANSI B 175.1-2000, only use replacement chains that, when used with this specific powerhead, comply with Section 5.11 of the ANSI standard or are classed as "reduced kickback" chains according to ANSI B 175.1-2000. Please ask your STIHL dealer for the latest recommendations on new bar/chain combinations developed after publication of this instruction manual. 56 MS 362