Stihl RMA 410 C Product Instruction Manual - Page 20
Light Emitting Diodes LED, on Charger
View all Stihl RMA 410 C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
English 2) During work: Machine switches off automatically - let the battery cool off for a while, it may help to remove the battery from the machine for this. 3) Electromagnetic malfunction or fault. Remove battery from the machine and reinsert it. Turn on the machine - if the LEDs still flash, the battery is faulty and must be replaced. 4) Electromagnetic malfunction or fault. Remove battery from the machine and reinsert it. Turn on the machine - if the LEDs still flash, the machine is faulty and must be checked by a servicing dealer - STIHL recommends STIHL servicing dealers. Light Emitting Diodes (LED) on Charger 1 The light emitting diode (1) lights up green or flashes red. Green continuous light ... ... means the following: The battery - is being charged - is too hot and must cool down before it is charged See also "Light Emitting Diodes (LED) on Battery". The green light emitting diode on the charger goes off as soon as the battery is fully charged. 3901BA019 KN Red flashing light ... ... means the following: - No electrical contact between battery and charger - remove and refit the battery - Faulty battery - see also "Light Emitting Diodes (LED) on Battery". - Charger faulty - have checked by a servicing dealer. STIHL recommends a STIHL servicing dealer. 18 RMA 370