Stihl TS 500i Instruction Manual - Page 52
Specifications
View all Stihl TS 500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
English Specifications EPA / CEPA The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category A = 300 hours B = 125 hours C = 50 hours CARB The Emission Compliance Period used on the CARB-Air Index Label indicates the terms: Extended = 300 hours Intermediate = 125 hours Moderate = 50 hours STIHL Injection Control unit with characteristic-curvedriven ignition timing adjustment Load dependent, characteristic-curvedriven fuel injection Electronic water control The electronic water control makes it possible to feed the optimum amount of water to the abrasive cutting wheel. No water is fed to the abrasive cutting wheel during idling. Engine STIHL single cylinder two-stroke engine TS 480i Displacement: 4.41 cu in (72.2 cm3) Cylinder bore: 2.05 in (52 mm) Piston stroke: 1.34 in (34 mm) Engine power accord- 5.2 hp (3.9 kW) ing to ISO 7293: at 9300 rpm Idling speed: 2500 rpm Max. spindle speed: 5350 rpm TS 500i Displacement: 4.41 cu in (72.2 cm3) Cylinder bore: 2.05 in (52 mm) Piston stroke: 1.34 in (34 mm) Engine power accord- 5.2 hp (3.9 kW) ing to ISO 7293: at 9300 rpm Idling speed: 2500 rpm Max. spindle speed: 5350 rpm Spark plug, fuel tank capacity Spark plug (suppressed): Bosch WSR 6 F Electrode gap: Fuel tank capacity: NGK BPMR 7 A 0.02 in (0.5 mm) 24.5 oz (0.725 l) Air filter Main filter (paper filter) and flocked wire mesh auxiliary filter Weight Without fuel, without abrasive cutting wheel, with electronic water control TS 480i: 22.0 lbs (10.0 kg) TS 500i: 22.5 lbs (10.2 kg) Abrasive cutting wheels The quoted maximum permissible operating speed of the abrasive cutting wheel must be greater than or equal to the maximum spindle speed of the cutoff machine used. Abrasive cutting wheels (TS 480i) Outside diameter: Max. thickness: Bore diameter/spindle diameter: Tightening torque: 12 in. (300 mm) 0.189 in. (4.8 mm) 0.787 in. (20 mm) 22 lbf ft (30 Nm) 50 TS 480i, TS 500i